TDA4841 datasheet(56/60 Pages) PHILIPS

56 / 60 page

1999 Oct 25

Philips Semiconductors

Product speciﬁcation

I2C-bus autosync deﬂection controller for

PC monitors

TDA4841PS

SOLDERING

Introduction to soldering through-hole mount

packages

This text gives a brief insight to wave, dip and manual

soldering. A more in-depth account of soldering ICs can be

found in our

“Data Handbook IC26; Integrated Circuit

Packages” (document order number 9398 652 90011).

Wave soldering is the preferred method for mounting of

through-hole mount IC packages on a printed-circuit

board.

Soldering by dipping or by solder wave

The maximum permissible temperature of the solder is

260

°C; solder at this temperature must not be in contact

with the joints for more than 5 seconds.

The total contact time of successive solder waves must not

exceed 5 seconds.

The device may be mounted up to the seating plane, but

the temperature of the plastic body must not exceed the

specified maximum storage temperature (Tstg(max)). If the

printed-circuit board has been pre-heated, forced cooling

may be necessary immediately after soldering to keep the

temperature within the permissible limit.

Manual soldering

Apply the soldering iron (24 V or less) to the lead(s) of the

package, either below the seating plane or not more than

2 mm above it. If the temperature of the soldering iron bit

is less than 300

°C it may remain in contact for up to

10 seconds. If the bit temperature is between

300 and 400

°C, contact may be up to 5 seconds.

Suitability of through-hole mount IC packages for dipping and wave soldering methods

Note

1. For SDIP packages, the longitudinal axis must be parallel to the transport direction of the printed-circuit board.

PACKAGE

SOLDERING METHOD

DIPPING

WAVE

DBS, DIP, HDIP, SDIP, SIL

suitable

suitable(1)

TDA4841 Datasheet(PDF) 56 Page - NXP Semiconductors

TDA4841 Datasheet(HTML) 56 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Datasheet Download

Link URL