| Electronic Components Datasheet Search |
|
STM32F101X6 Datasheet(PDF) 30 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F101X6 Datasheet(HTML) 30 Page - STMicroelectronics |
|
30 / 64 page ![]() Electrical characteristics STM32F101xx 30/64 Typical current consumption The MCU is placed under the following conditions: ● All I/O pins are in input mode with a static value at VDD or VSS (no load) ● All peripherals are disabled except if it is explicitly mentioned ● The Flash access time is adjusted to fHCLK frequency (0 wait state from 0 to 24 MHz, 1 wait state from 24 to 36 MHz) The parameters given in Table 13 are derived from tests performed under ambient temperature and VDD supply voltage conditions summarized in Table 7. Table 13. Typical current consumption in Run and Sleep modes(1) Symbol Parameter Conditions fHCLK Typ(2) Unit IDD Supply current in Run mode Oscillator running at 8 MHz with PLL, code running from Flash, all peripheral disabled (see RCC register description): fPCLK1= fHCLK/2, fPCLK2 = fHCLK 36 MHz TBD mA 24 MHz 13 16 MHz TBD Running on HSI clock, code running from Flash, all peripheral disabled (see RCC register description): fPCLK1= fHCLK/2, fPCLK2 = fHCLK. AHB pre-scaler used to reduce the frequency 8 MHz 7.8 mA 4 MHz 7 2 MHz 6.3 1 MHz 6.2 500 kHz 6.1 125 kHz 5.95 Running on HSI clock, code running from RAM, all peripheral disabled (see RCC register description): fPCLK1= fHCLK/2, fPCLK2 = fHCLK. AHB pre-scaler used to reduce the frequency 8 MHz 2.3 mA 4 MHz 1.6 2 MHz 1.2 1 MHz 1 500 kHz 0.88 125 kHz 0.82 Supply current in Sleep mode Oscillator running at 8 MHz with PLL, code running from Flash, all peripheral disabled (see RCC register description): fPCLK1= fHCLK/2, fPCLK2 = fHCLK 36 MHz TBD mA 24 MHz TBD 16 MHz 1 Running on HSI clock, code running from Flash, all peripheral disabled (see RCC register description): fPCLK1= fHCLK/2, fPCLK2 = fHCLK. AHB pre-scaler used to reduce the frequency 8 MHz TBD mA 4 MHz TBD 2 MHz TBD 1 MHz TBD 500 kHz TBD 1. TBD stands for to be determined. 2. Typical values are measures at TA = 25 °C, VDD = 3.3 V. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |