PIC16F16-ESLASHP datasheet(43/136 Pages) MICROCHIP

43 / 136 page

DS41206B-page 41

PIC16F716

7.2.7

ADC REGISTER DEFINITIONS

The following registers are used to control the

operation of the ADC.

ADCON0: A/D CONTROL REGISTER 0

R/W-0

U-0

R/W-0

ADCS1

ADCS0

CHS2

CHS1

CHS0

GO/DONE

—

ADON

bit 7

bit 0

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

-n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

x = Bit is unknown

bit 7-6

ADCS<1:0>: A/D Conversion Clock Select bits

= FOSC/2

= FOSC/8

= FOSC/32

= FRC (Clock derived from the internal ADC RC oscillator)

bit 5-3

CHS<2:0>: Analog Channel Select bits

000

= AN0

001

= AN1

010

= AN2

011

= AN3

100

= Reserved, do not use

101

= Reserved, do not use

110

= Reserved, do not use

111

= Reserved, do not use

bit 2

GO/DONE: A/D Conversion Status bit

= A/D conversion cycle in progress. Setting this bit starts an A/D conversion cycle.

This bit is automatically cleared by hardware when the A/D conversion has completed.

= A/D conversion completed/not in progress

bit 1

Unimplemented: Read as ‘0’

bit 0

ADON: ADC Enable bit

= ADC is enabled

= ADC is disabled and consumes no operating current

PIC16F16-E/P Datasheet(PDF) 43 Page - Microchip Technology

PIC16F16-E/P Datasheet(HTML) 43 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL