STAC9250 datasheet(16/137 Pages) IDT

16 / 137 page

STAC9250/9251

TWO-CHANNEL HD AUDIO CODEC WITH MODEM & DUAL DIGITAL MICROPHONE INTERFACES

PC AUDIO

IDT™

STAC9250/9251

V 1.1 102706

TWO-CHANNEL HD AUDIO CODEC WITH MODEM & DUAL DIGITAL MICROPHONE INTERFACES

3. DETAILED DESCRIPTION

3.1.

SPDIF Input

SPDIF IN can operate at 44.1 KHz or 96 KHz, and implements internal Jack Sensing. A sophisti-

cated digital PLL allows automatic rate detection and accurate data recovery. The ability to directly

accept consumer SPDIF voltage levels eliminates the need for costly external receiver ICs.

Advanced features such as record slot select and SPDIF_IN routing to the DAC allows for simulta-

neous record and play.

3.2.

SPDIF Output

SPDIF OUT can operate at 44.1 KHz, 48 KHz, 88.2 KHz, and 96 KHz, as defined in the Intel High

Definition Audio Specification, with resolutions up to 24 bits. This insures compatibility with all con-

sumer audio gear and allows for convenient integration into home theater systems and media center

PCs.

3.3.

Digital Microphone Support (STAC9251 only)

The STAC9251 has a three-pin digital microphone interface that accepts high-rate, single-bit data

streams from two digital microphones. Each microphone requires only one data line. Both micro-

phones share a single clock line. This robust digital interface gives designers the flexibility to place

the microphones in the optimum location on a system (such as along the top of the screen bezel)

and use a simple, 3-wire ribbon cable to directly connect the microphones to the STAC9251

CODEC.

3.4.

SiLabs System Side Modem

A licensed Silicon Labs System Side modem based on the Si3054 architecture is integrated into

STAC9250/9251. Combined with a Silicon Labs Line Side IC (Si3080 or similar), the STAC9250/

9251 allows designers to implement a two-chip HD Audio and HD Modem solution for significant

cost and board space savings.

3.5.

Mono Out

The MONO Output is connected to pin 37 and has independent volume and mute control (see the

Widget listing for details). The MONO Output derives it’s input from the output of the summing node

that drives PORT A and PORT D. The following analog signals feed the summing amplifier that

feeds the MONO Out summing amplifier:

•

DAC Output: When enabled, both DAC Outputs are summed together.

•

Analog PC Beep: Source from Pin 12

•

ADC Input: Stereo analog feed into the stereo ADC input.

The combination of the stereo channels from DAC are combined into a single analog signal with a

-6dB degradation in signal strength.

STAC9250 Datasheet(PDF) 16 Page - Integrated Device Technology

STAC9250 Datasheet(HTML) 16 Page - Integrated Device Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL