Features

•

“Promodules”: turnkey camera modules for evaluation:

–

Including VD56G3 image sensor, lens holder, lens, and plug-and-play

flex connection.

–

Lens focused, glued, and tested in cleanroom environment using

specialized equipment.

–

Small footprint down to 6.5 mm square.

•

Various lens options:

–

Ultra-wide-angle lens for wide scene capture (152° DFOV).

–

Highly compact lens for a thin module (84° DFOV).

–

General purpose lens enabling various system setups (73° DFOV).

•

Plug-and-play connector to change promodules at any time:

–

FPC-to-board 30-pin connector.

–

Same connector for all ST promodules.

•

Ready for evaluation and integration:

–

On computer with a USB output using the EVK Main hardware tool and

the Evaluation GUI free software.

–

On embedded processing platforms with a MIPI CSI-2 output using the

P-Board hardware tool and free Linux software tools.

•

Promodules also available in color RGB versions (CAM-66GY).

Description

The CAM-56G3 promodules are a full range of sample camera modules made for a

seamless evaluation and integration of the VD56G3 1.5-megapixel monochrome

image sensor. These ready-to-use vision extensions integrate VD56G3 image

sensor, lens holder, lens, and plug-and-play flex connection in a tiny format down to

6.5 mm square.

The CAM-56G3 line leverages the complete toolbox of on-chip features of the

VD56G3 image sensor embedded, such as binning, autoexposure, or context

management. Multiple GPIOs enable users to synchronize the modules with triggers

and illumination. Featuring MIPI CSI-2 output, the promodules are perfectly suited for

embedded low-power setups.

Multiple promodule references are available, featuring various lenses to best match

the needs of every application in terms of optical setup and mechanical constraints.

All camera modules are equipped with the same FPC-to-board connector and pinout.

This plug-and-play architecture allows users to change promodule instantly, and

reuse the same setup with different lenses, color options and even different image

sensors in the ST BrightSense portfolio.

CAM-56G3 promodules can be tested and integrated on computers or embedded

processing boards using hardware and software tools from STMicroelectronics. The

compatible EVK Main and P-Board hardware kits enable straight connection to PC

and embedded processing platforms respectively. Evaluation GUI software and Linux

drivers are available for download from the Imaging Software section of the website.

Order code

Description

CAM-6G3-073CLR

VD56G3 promodule

with 73° FoV lens

CAM-6G3-084CLR

VD56G3 promodule

with 84° FoV lens

CAM-6G3-152CLR

VD56G3 promodule

with 152° FoV lens

VD56G3 promodules:

Camera module evaluation samples for instant integration of VD56G3 sensor

CAM-56G3

Data brief

DB5264 - Rev 1 - May 2024

For further information contact your local STMicroelectronics sales office.

www.st.com