 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
MB90347CE Datasheet(PDF) 48 Page - fujitsu semiconductor |
|
|
|||||||||||||||||||||||||||||
MB90347CE Datasheet(HTML) 48 Page - fujitsu semiconductor |
|
|
48 / 84 page  MB90340E Series 48 ■ ELECTRICAL CHARACTERISTICS 1. Absolute Maximum Ratings *1: This parameter is based on VSS = AVSS = 0 V *2: Set AVCC and VCC to the same voltage. Make sure that AVCC does not exceed VCC and that the voltage at the analog inputs does not exceed AVCC when the power is switched on. *3: VI and VO should not exceed VCC + 0.3 V. VI should not exceed the specified ratings. However if the maximum current to/from an input is limited by some means with external components, the ICLAMP rating supersedes the VI rating. *4: Applicable to pins: P00 to P07, P10 to P17, P20 to P27, P30 to P37, P40 to P47, P50 to P57, P60 to P67, P70 to P77, P80 to P87, P90 to P97, PA0, PA1 *5: • Applicable to pins: P00 to P07, P10 to P17, P20 to P27, P30 to P37, P40 to P47, P50 to P57 (Evaluation device : P50 to P55) , P60 to P67, P70 to P77, P80 to P87, P90 to P97, PA0 to PA1 • Use within recommended operating conditions. • Use with DC voltage (current) • The +B signal should always be applied by using a limiting resistance placed between the +B signal and the microcontroller. • The value of the limiting resistance should be set so that when the +B signal is applied, the input current to the microcontroller pin does not exceed the rated value, either instantaneously or for prolonged periods. • Note that when the microcontroller drive current is low, such as in the power saving modes, the +B input potential may pass through the protective diode and increase the potential at the VCC pin, and this may affect other devices. (Continued) Parameter Symbol Rating Unit Remarks Min Max Power supply voltage*1 VCC VSS − 0.3 VSS + 6.0 V AVCC VSS − 0.3 VSS + 6.0 V VCC = AVCC*2 AVRH, AVRL VSS − 0.3 VSS + 6.0 V AVCC ≥ AVRH, AVCC ≥ AVRL, AVRH ≥ AVRL Input voltage*1 VI VSS − 0.3 VSS + 6.0 V *3 Output voltage*1 VO VSS − 0.3 VSS + 6.0 V *3 Maximum Clamp Current ICLAMP −4.0 +4.0 mA *5 Total Maximum Clamp Current Σ|ICLAMP| ⎯ 40 mA *5 “L” level maximum output current IOL ⎯ 15 mA *4 “L” level average output current IOLAV ⎯ 4mA *4 “L” level maximum overall output current ΣIOL ⎯ 100 mA *4 “L” level average overall output current ΣIOLAV ⎯ 50 mA *4 “H” level maximum output current IOH ⎯−15 mA *4 “H” level average output current IOHAV ⎯−4mA *4 “H” level maximum overall output current ΣIOH ⎯−100 mA *4 “H” level average overall output current ΣIOHAV ⎯−50 mA *4 Power consumption PD ⎯ 340 mW MB90F347E Operating temperature TA −40 +105 °C Storage temperature TSTG −55 +150 °C |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
