Data Sheet

E2 Sanitary Pressure Transducer

of 6

1

All specifications are subject to change without notice. All sales subject to standard terms and conditions.

Ashcroft® and Trust the Shield® are trademarks of Ashcroft Inc. The following non-Ashcroft trademarks are

the property of their respective owners: 17-4PH®, AMP®, Deutsch®, Hirschmann®, Metri-Pack®, Neobee®,

Superseal® and Tri-Clamp®. For more information, see Ashcroft Brands & Trademarks

©2024 Ashcroft Inc. e2_san_seal_trans_ds_RevG_10-24-24

ashcroft.com

| 1.800.328.8258 | Contact Us

E2 Sanitary Pressure Transducer

PERFORMANCE SPECIFICATIONS

Reference

Temperature:

21 °C ±2 °C (70 °F ±3 °F)

Static Accuracy:

±0.25% of span, ±0.50% of span, ±1.0% of span,

Terminal Point Method includes: hysteresis,

linearity, repeatability, offset and span

Stability:

±0.25% year at reference conditions

ENVIRONMENTAL SPECIFICATIONS

Thermal

Coefficients:

Offset: ±0.009% /°C from -40 °C to 125 °C

Span: ±0.009% /°C from -40 °C to 125 °C

Humidity:

0-100% (non-condensing)

FUNCTIONAL SPECIFICATIONS

Response Time (Output)

4 ms

Gauge/Compound Pressure Ranges:

VAC to 1000 psig

AbsolutePressure Ranges:

0 to 500 psia

Proof Pressure:

1.2X - 2X (See Table 1 on page 2)

Burst Pressure:

3X - 8X (See Table 1 on page 2)

Additional Offset Temperature Error (21 °C Reference Temp.)

Glycerin

Silicone

1.5˝ Fitting

0.8 psi/100 °C

1.4 psi/100 °C

2.0˝ Fitting

0.5 psi/100 °C

0.7 psi/100 °C

ELECTRICAL SPECIFICATIONS

Circuit Protection:

Reverse polarity protected

INTRINSICALLY SAFE INSTALLATIONS

Supply Voltage: Output

9-28 Vdc: 0-5 Vdc, 1-5 Vdc, 1-6 Vdc, 0.1-5 Vdc, 0.5-4.5 Vdc

14-28 Vdc: 0-10 Vdc, 1-11 Vdc, 0.1-10 Vdc

9-30 Vdc: 4-20 mA, 20-4 mA (2-wire)

NON-INCENDIVE INSTALLATIONS:

Supply Voltage: Output

9-28 Vdc: 0-5 Vdc, 1-5 Vdc, 1-6 Vdc, 0.1-5 Vdc, 0.5-4.5 Vdc

14-28 Vdc: 0-10 Vdc, 1-11 Vdc, 0.1-10 Vdc

9-30 Vdc: 4-20 mA, 20-4 mA (2-wire)

Adjustability:

±5% of span non-interactive offset & span

Supply Current:

<8 mA (Vout)

Curent Source/Sink

for Voltage Output

1 mA (source)/ 0.1 mA (sink) MAX.

Withstand/Breakdown 100 Vdc/Vac, optional 500 Vdc/Vac

FEATURES

„

Available with 1.5˝ and 2.0˝ Tri-Clamp® connection

„

Ranges vacuum through 1000 psi

„ Glycerin fill fluid is standard for ranges from

0 to 1000 psi, mineral oil fill fluid is standard on

vacuum, compound and absolute ranges.

„

Wide selection of electrical terminations

„

Customizable configurations

„

External magnetic offset & span adjustment

„

SIL 3 capable

TYPICAL USES

„

Food, dairy and beverage production

„

Pharmaceutical

„

3-A Sanitary applications

„

Biotech and medical equipment

„

Filtration

KEY BENEFITS

•Highly configurable

•Easy calibration of offset and span

•SIL certified

Temperature Limits: (Subject to Fill Fluid)

Code Fill Fluid

Storage Operating and Media Temperature

CG*

Glycerine

0 °F to 257 °F (-18 °C to 125 °C) (STD.)

*

Standard on ranges from 0 to 1000 psig.

CZ

Food grade Silicone

-40 °F to 257 °F (-40 °C to 125 °C)

FJ

Distilled water

40 °F TO 185 °F (4 °C TO 85 °C)

MY*

Mineral oil

10 °F to 257 °F (-12 °C to 125 °C)

*

Standard on all vacuum, compound and

absolute ranges.

NM

Neobee® M20

5 °F to 257 °F (-5 °C to 125 °C)

Note: Contact Ashcroft for alternate fill fluids