TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.0.0

21.09.2021

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

E-Mail: info@tews.com

www.tews.com

The Embedded I/O Company

TCPS007-TM Rear I/O Module for Quad 10/100/1000 Ethernet

CPCI-S.0 Modules

TCPS007-TM-10R

Application Information

The TCPS007-TM is a PICMG CPCI-S.0 R2.0 compatible

3U rear I/O module that provides a four channel 10Base-T

/ 100Base-TX / 1000Base-T Ethernet interface.

The TCPS007-TM distributes the Ethernet signals of

TEWS' Gigabit Ethernet CPCI-S.0 modules with rear I/O to

RJ-45 connectors located in the front panel of the module.

Impedance mismatches, caused by backplane connectors,

lead to signal distortion of the Ethernet signals. To reduce

these effects, the routing on the TCPS007-TM is optimized

for differential Ethernet signals.

Additionally, common mode choke filters are placed into

the Ethernet signal lines to improve signal quality by

suppressing common mode noise on the Ethernet signal

lines.

The operating temperature is -40°C to +85°C.

Technical Information

 Form Factor: CPCI-S.0 Rear Board

 Board size: 100 mm x 80 mm

 I/O lines routed to RJ45 connectors in the front panel

 Operating temperature -40°C to +85°C

 MTBF (MIL-HDBK217F/FN2 GB 20°C)

TCPS007-TM-10R: 56578000 h