TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.1.3

2019-09-25

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com

The Embedded I/O Company

TVME211

VMEbus Carrier for 2 IndustryPacks®

Application Information

The TVME211 is a 3U VMEbus Carrier for up to two

single- size or one double-size IndustryPack (IP) modules

allowing to build up modular, flexible and cost effective I/O

solutions for all kinds of applications like process control,

medical systems, telecommunication and traffic control.

Two 50 pin 0.1 inch flat ribbon cable connectors mounted

in the front panel of the TVME211 provide access to all IP

I/O lines.

A set of 16-position rotary switches allows easy

configuration of VME Short I/O and Memory addresses.

Interrupt routing from the IP slots to the VME IRQ’s can be

done in two ways: programmable by software or selection

of predefined sets by a rotary switch.

The IP power lines are fuse protected by self healing fuses

and RF filtered. The operating temperature range is -40°C

and +85°C.

Technical Information



Form Factor: VMEbus board, 3U



VMEbus Slave Interface:



Short I/O: A16, D08/16, size: 512 bytes



Standard Memory: A24, D08/16,

Size: programmable, 32 Kbytes to 4 Mbytes per

IP or 2 Mbytes to 8 Mbytes for one IP



Interrupts: IRQ1-7



ANSI/VITA 4-1995 compliant interface to

IndustryPack modules



IndustryPack slots: Two single-size or one

double-size with front panel I/O



8 MHz interface, no DMA



Routing of IP Interrupt Levels to VME IRQ1-7:

programmable by software or selection of

predefined sets by a rotary switch



I/O access: 50 pin 0.1 inch flat ribbon cable

connector (stacked version) per IP mounted in

front panel



Self Healing fuses and RF-filtering on all IP power

lines



Operating temperature –40°C to +85°C