MAX4541CSLASHD datasheet(2/16 Pages) MAXIM

2 / 16 page

Low-Voltage, Single-Supply

Dual SPST/SPDT Analog Switches

_______________________________________________________________________________________

Voltage Referenced to GND

V+ .........................................................................-0.3V to +13V

IN_, COM_, NC_, NO_ (Note 1)..................-0.3V to (V+ + 0.3V)

Continuous Current (any terminal)....................................±10mA

Peak Current, COM_, NO_, NC_

(pulsed at 1ms, 10% duty cycle max) ............................±20mA

ESD per Method 3015.7 .................................................> 2000V

Continuous Power Dissipation

SOT23-6 (derate 7.1mW/°C above +70°C)....................571mW

SOT23-8 (derate 5.3mW/°C above +70°C)....................421mW

TDFN (derate 24.4mW/°C above +70°C).....................1951mW

µMAX (derate 4.10mW/°C above +70°C) ......................330mW

Narrow SO (derate 5.88mW/°C above +70°C) ..............471mW

Plastic DIP (derate 9.09mW/°C above +70°C) ..............727mW

Operating Temperature Ranges

MAX454_C_ _ .......................................................0°C to +70°C

MAX454_E_ _.....................................................-40°C to +85°C

Storage Temperature Range .............................-65°C to +150°C

Lead Temperature (soldering, 10s) .................................+300°C

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional

operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to

absolute maximum rating conditions for extended periods may affect device reliability.

ABSOLUTE MAXIMUM RATINGS

ELECTRICAL CHARACTERISTICS—Single +5V Supply

(V+ = +5V ±10%, GND = 0, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) (Notes 2, 3)

Note 1: Signals on NC_, NO_, COM_, or IN_ exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to maximum

current rating.

COM_ On-Leakage Current

(Note 7)

ICOM(ON)

V+ = 5.5V;

VCOM_ = 1V, 4.5V or

VNO_ or VNC_ = 1V,

4.5V, or floating

COM_ Off-Leakage Current

(Note 7)

ICOM(OFF)

V+ = 5.5V;

VCOM_ = 4.5V, 1V;

VNO_ or VNC_ = 1V, 4.5V

NO_ or NC_ Off-Leakage

Current (Note 7)

INO(OFF)

INC(OFF)

V+ = 5.5V;

VCOM_ = 1V, 4.5V;

VNO_ or VNC_ = 4.5V, 1V

-10

+10

C, E

TA = TMIN

to TMAX

TA = TMIN

to TMAX

TA = TMIN

to TMAX

-5

-0.2

+0.2

-0.1

+0.1

-0.1

±0.01

+0.1

V+ = 5V;

ICOM_ = 1.0mA; VNO_ or

VNC_ = 1V, 2V, 3V

RFLAT(ON)

On-Resistance Flatness

(Note 6)

V+ = 5V,

ICOM_ = 1.0mA,

VNO_ or VNC_ = 3.5V

0.8

ΔRON

On-Resistance Match

Between Channels (Note 5)

TA = TMIN to TMAX

TA = +25°C

V+ = 4.5V,

ICOM_ = 1.0mA,

VNO_ or VNC_ = 3.5V

RON

On-Resistance

(Note 4)

CONDITIONS

0V+

VCOM_,

VNO_,

VNC_

Analog Signal Range

UNITS

MIN

TYP

MAX

SYMBOL

PARAMETER

ANALOG SWITCH

MAX4541C/D Datasheet(PDF) 2 Page - Maxim Integrated Products

MAX4541C/D Datasheet(HTML) 2 Page - Maxim Integrated Products

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Datasheet Download

Link URL