AV22LP402 datasheet(17/20 Pages) APEM

17 / 20 page

B-104

APEM

www.apem.com

AV series

Snap-action security pushbutton switches

Bushing Ø 19 (.748) - illuminated or not - momentary (NO)

Flat actuator - illuminated

Solder lug terminals

AV09C7L3D200

Screw terminals

AV09C7L3D900

(function 3)

SPECIFICATIONS

• Max. current/voltage rating with resistive load : 50mA 24VDC

• LED voltage and consumption : 2-colour LED : 2V (3V max.) 20mA

Other colours : 2V (3V max.) 10mA

A resistor must be series-connected by the user.**

• Initial contact resistance : 100 mΩ max.

• Insulation resistance : 1.000 MΩ min. at 500VDC

• Dielectric strength : 500 Vrms 50 Hz min. between terminals

2.000 Vrms 50 Hz min. between terminals and bushing

• Electrical life : 1.000.000 cycles at full load

• Operating force : 7 N +/-2N

• Travel : 0,7 mm (.027) +/- 0,1 mm (.003)

•Torque : 5 Nm min.- 14 Nm max. applied to nut

• Panel thickness : 1 (.039) to 11 mm (.433) max.

• Operating temperature : -30°C to +70°C

• Soldering : 270°C max. during 3 sec.

• Packaging unit : 40 pieces

** Resistor value = supply voltage - LED forward voltage

LED forward current

Flat actuator - non-illuminated

Hex nut 22 (.866) across flats

Solder lug terminals

AV09C703D200

Screw terminals

AV09C703D900

Also available with curved actuator :

AV19C703D200

or AV19C703D900

MATERIALS

• Case : PBT UL94-V0

• Terminals : brass, gold plated

• Contacts : gold plated dome

• Bushing : brass, nickel plated (std)

• Actuator : brass, nickel plated (std)

• LED

CUT

-OUTS

• Panel cut-out :

Ø 19,2 mm (.755)

• Min. pitch for matrix mounting :

30 mm (1.181) x 30 mm (1.181)

(.074)

1.90

(.153)

3.90

Ø19.00x1.00 SI

3.00

2.00

13.50

(.748DIAx1.00 IS)

(.118)

(.078)

(.531)

(.163)

4.15

EPOXY

(.519)

13.20

13.50

(.531)

(.078)

2.00

(.531)

(.078)

(.118)

(.748DIAx1.00 IS)

13.50

2.00

3.00

Ø19.00x1.00 SI

3.90

(.153)

4.15

(.163)

1.90

(.074)

EPOXY

(.078)

2.00

(.519)

13.20

13.50

(.531)

ORDER FORMAT

Series Bush./act.

config.

Case

style

Funct.

Illum.

or not

Contact

matl.

Term.

type

Bush./act.

material

Marking

LED

colour

Seal.

See ”options” on next page.

All model numbers below are for switches

with standard bushing/actuator material,

without marking.

Hex nut 22 (.866) across flats

AV22LP402 Datasheet(PDF) 17 Page - APEM

AV22LP402 Datasheet(HTML) 17 Page - APEM

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Datasheet Download

Link URL