OM13088

Product Brief

LPCXpresso4367 Development Board

Rev 1.1 - October 19th 2015

© NXP B.V. 2015.

All rights reserved.

For more information, please visit: http://www.nxp.com

For sales office addresses, please send an email to: salesaddresses@nxp.com

Date of release: 19th January 2015

LPCXpresso IDE

LPCXpresso IDE supports programming and debugging LPCXpresso boards using the on-board CMSIS-

DAP debug interface, or with an external debug probe such as LPC-Link2. LPCXpresso4367 is ready for use

with the LPCXpresso IDE. An external debug probe can be used by simply connecting it to the board via the P1

connector and powering the board via the J3 USB connection.

Partner development tools

The LPCXpresso4367 board can be used with development tools from NXP partners including Atollic, Keil, IAR,

Rowley and SEGGER. The board is pre-programmed with CMSIS-DAP firmware, so can also be used with

these tool-chains by setting the on-board debug probe to boot from flash (removing the JP3 jumper). Please

refer to our partners for details on using their tools with the board.

LPCOpen drivers and examples

LPCOpen software packages allow users to quickly and easily utilize NXP's extensive array of microcontroller

software libraries to create and develop multifunctional products. Drivers for the LPCXpresso4367 board can

be downloaded for free at http://www.lpcware.com/lpcopen.

Board specifications

Recommended operating conditions: 0 to 70oC ambient

Weight: 31g (1.1 ounces)

Size: 123 x 59mm (4.8 x 2.3 inches) including connectors

The LPCXpresso4367 board is RoHS compliant.