RADIAFLEX

• Metalwork : Mild steel, plated.

• Natural rubber, bonded, cylindrically shaped.

• Welded fixings: 5 styles (single sided threaded stud, single sided

threaded hole, double threaded stud, double threaded holes,

combination fixing).

In Europe, we often use different screw standards than our french

standard.

To better satisfy this need, Paulstra has created a new range TRadiaflex

Europe.

This range is available with the 4 usual welded fixings and with a new

fixing : the threaded hole stop.

The design of the RADIAFLEX mount gives the following basic

characteristics :

• Radial elasticity greater than axial elasticity.

• The rubber works in :

- compression (axial).

- shear (radial).

- compression/shear according to the fixing method.

Advantages :

• Simple to fix.

• Simple and economical.

• Extensive range :

- 11 stud diameters.

- Several heights for each diameter.

- 5 methods of fixing.

Recommendations :

• Operation in shear is very useful for vibration isolation provided that

the radial forces are not too great.

DESCRIPTION

CHARACTERISTICS

34