#2-56 INSERT

0.156 (3.96) DEEP

FRONT VIEW

1.280

(32.51)

0.187

(4.75)

DMS-BZL4 BEZEL

RECOMMENDED DRILL AND PANEL CUTOUT DIMENSIONS

1.826 (46.38)

0.838

(21.29)

1.626 (41.30)

1.07

(27.18)

INTERNAL CORNER RADII:

0.032 (0.81) MAX.

0.093 (2.362) DIAMETER (4 REQUIRED)

ONLY WHEN USING SUPPLIED BEZEL ASSEMBLY

0.116 (2.95)

1.336 (33.93)

0.145 (3.68)

MECHANICAL DIMENSIONS: Inches (mm)

TOLERANCES: 2 PL DEC ±0.02 (±0.51)

3 PL DEC ±0.010 (±0.254)

1

1

1

2

2

CAL

TB1

TB2

J1 J2

J3

1

1

2

2

3

1

2

SG3

SG2

SG1

0.80

(20.3)

0.88

(22.4)

1.30

(33.0)

0.040

(1.02)

1.00

(25.4)

0.475

(12.1)

0.040

(1.02)

1.38

(35.1)

1.42

(36.1)

FRONT VIEW

BACK VIEW

–IN

DP2

DP1

DP3

+IN

+V –V

MECHANICAL SPECIFICATIONS

BEZEL INSTALLATION AND RECOMMENDED DRILL AND PANEL CUTOUT

www.murata-ps.com/support

Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other

technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply

the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without

notice.

© 2015 Murata Power Solutions, Inc.

Murata Power Solutions, Inc.

11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.

ISO 9001 and 14001 REGISTERED

This product is subject to the following operating requirements

and the Life and Safety Critical Application Sales Policy:

Refer to: http://www.murata-ps.com/requirements/

DCA5-20PC Series

50mV & 100mV Input, LED-Display, Subminiature DC Ammeters

MPM_DCA5-20PC.C01 Page 6 of 6