CD74FCT623

BiCMOS OCTAL BUS TRANSCEIVER

WITH 3-STATE OUTPUTS

SCBS736 – JULY 2000

3

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†

DC supply voltage range, VCC

–0.5 V to 6 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DC input clamp current, IIK (VI < –0.5 V)

–20 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DC output clamp current, IOK (VO < –0.5 V)

–50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DC output sink current per output pin, IOL

70 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DC output source current per output pin, IOH

–30 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous current through VCC, ICC

140 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous current through GND

528 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

θJA (see Note 1): E package

69

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

M package

58

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SM package

70

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range, Tstg

–65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTE 1: The package thermal impedance is calculated in accordance with JESD 51.

recommended operating conditions (see Note 2)

MIN

MAX

UNIT

VCC

Supply voltage

4.75

5.25

V

VIH

High-level input voltage

2

V

VIL

Low-level input voltage

0.8

V

VI

Input voltage

0

VCC

V

VO

Output voltage

0

VCC

V

IOH

High-level output current

–15

mA

IOL

Low-level output current

64

mA

∆t/∆v

Input transition rise or fall rate

0

10

ns/V

TA

Operating free-air temperature

0

70

°C

NOTE 2: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,

Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

electrical characteristics over recommended operating temperature range (unless otherwise

noted)

PARAMETER

TEST CONDITIONS

VCC

TA = 25°C

MIN

MAX

UNIT

PARAMETER

TEST CONDITIONS

VCC

MIN

MAX

MIN

MAX

UNIT

VIK

II = –18 mA

4.75 V

–1.2

–1.2

V

VOH

IOH = –15 mA

4.75 V

2.4

2.4

V

VOL

IOL = 64 mA

4.75 V

0.55

0.55

V

II

VI = VCC or GND

5.25 V

±0.1

±1

mA

IOZ

VO = VCC or GND

5.25 V

±0.5

±10

mA

IOS‡

VI = VCC or GND,

VO = 0

5.25 V

–60

–60

mA

ICC

VI = VCC or GND,

IO = 0

5.25 V

8

80

mA

∆ICC§

One input at 3.4 V,

Other inputs at VCC or GND

5.25 V

1.6

1.6

mA

Ci

VI = VCC or GND

10

10

pF

Co

VO = VCC or GND

15

15

pF

‡ Not more than one output should be tested at a time, and the duration of the test should not exceed 100 ms.

§ This is the increase in supply current for each input at one of the specified TTL voltage levels rather than 0 V or VCC.