PCF85063TP datasheet(12/52 Pages) NXP

12 / 52 page

PCF85063TP

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 6 May 2015

12 of 52

NXP Semiconductors

PCF85063TP

Tiny Real-Time Clock/calendar

The duration of the timer is affected by the register Offset (see Section 8.2.3). Only when

OFFSET[6:0] has the value 00h the periods are consistent.

8.2.2.2

TF: timer flag

The timer flag (bit TF) is set logic 1 on the first trigger of MI or HMI and remains set until it

is cleared by command.

8.2.2.3

COF[2:0]: Clock output frequency

A programmable square wave is available at pin CLKOUT. Operation is controlled by the

COF[2:0] bits in the register Control_2. Frequencies of 32.768 kHz (default) down to 1 Hz

can be generated for use as a system clock, microcontroller clock, input to a charge

pump, or for calibration of the oscillator.

Pin CLKOUT is a push-pull output and enabled at power-on. CLKOUT can be disabled by

setting COF[2:0] to 111. When disabled, the CLKOUT is LOW.

The duty cycle of the selected clock is not controlled but due to the nature of the clock

generation, all clock frequencies except 32.768 kHz have a duty cycle of 50 : 50.

The STOP bit function can also affect the CLKOUT signal, depending on the selected

frequency. When the STOP bit is set logic 1, the CLKOUT pin generates a continuous

LOW for those frequencies that can be stopped. For more details of the STOP bit function,

see Section 8.2.1.2.

[1]

Duty cycle definition: % HIGH-level time : % LOW-level time.

[2]

Default value.

[3]

1 Hz clock pulses are affected by offset correction pulses.

Table 10.

Effect of bits MI and HMI on INT generation

Minute interrupt (bit MI)

Half minute interrupt (bit HMI)

Result

no interrupt generated

an interrupt every minute

an interrupt every 30 s

Table 11.

CLKOUT frequency selection

COF[2:0]

CLKOUT frequency (Hz) Typical duty cycle[1]

Effect of STOP bit

000[2]

32768

60 : 40 to 40 : 60

no effect

001

16384

50 : 50

no effect

010

8192

50 : 50

no effect

011

4096

50 : 50

CLKOUT = LOW

100

2048

50 : 50

CLKOUT = LOW

101

1024

50 : 50

CLKOUT = LOW

110

1[3]

50 : 50

CLKOUT = LOW

111

CLKOUT = LOW

PCF85063TP Datasheet(PDF) 12 Page - NXP Semiconductors

PCF85063TP Datasheet(HTML) 12 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Datasheet Download

Link URL