Not Recommended for New Designs

PCM2903B

www.ti.com

SLES228 – DECEMBER 2008

Interface #0

Interface #0 is the control interface. Alternative setting #0 is the only possible setting for interface #0. Alternative

setting #0 describes the standard audio control interface. The audio control interface consists of a single

terminal. The PCM2903B has the following five terminals:

•

Input terminal (IT #1) for isochronous-out stream

•

Output terminal (OT #2) for audio analog output

•

Feature unit (FU #3) for DAC digital attenuator

•

Input terminal (IT #4) for audio analog input

•

Output terminal (OT #5) for isochronous-in stream

Input terminal #1 is defined as USB stream (terminal type 0x0101). Input terminal #1 can accept two-channel

audio streams consisting of left and right channels. Output terminal #2 is defined as a speaker (terminal type

0x0301). Input terminal #4 is defined as a microphone (terminal type 0x0201). Output terminal #5 is defined as a

USB stream (terminal type 0x0101). Output terminal #5 can generate two-channel audio streams composed of

left and right channel data. Feature unit #3 supports the following sound control features:

•

Volume control

•

Mute control

The built-in digital volume controller can be manipulated by an audio class specific request from 0 dB to –64 dB

in 1-dB steps. Changes are made by incrementing or decrementing by one step (1 dB) for every 1/fS time interval

until the volume level has reached the requested value. Each channel can be set for different values. The master

volume control is not supported. A request to the master volume is stalled and ignored. The built-in digital mute

controller can be manipulated by audio class-specific request. A master mute control request is acceptable. A

request to an individual channel is stalled and ignored.

Interface #1

Interface #1 is the audio streaming data-out interface. Interface #1 has the five alternative settings described in

Table 5. Alternative setting #0 is the zero-bandwidth setting.

Table 5. Interface #1 Alternative Settings

ALTERNATIVE

TRANSFER

SAMPLING RATE

SETTING

DATA FORMAT

MODE

(kHz)

00

Zero bandwidth

01

16-bit

Stereo

Twos complement (PCM)

Adaptive

32, 44.1, 48

02

16-bit

Mono

Twos complement (PCM)

Adaptive

32, 44.1, 48

03

8-bit

Stereo

Twos complement (PCM)

Adaptive

32, 44.1, 48

04

8-bit

Mono

Twos complement (PCM)

Adaptive

32, 44.1, 48

Copyright © 2008, Texas Instruments Incorporated

Submit Documentation Feedback

21

Product Folder Links: PCM2903B