AML71SCB datasheet(2/2 Pages) HONEYWELL

2 / 2 page

Manual Switches

AML76/78 Series

Switch Guard/Panel Plugs, Dummy Housings

Honeywell Sensing and Control 1-800-537-6945 USA

1-815-235-6847 International 1-800-737-3360 Canada

FEATURES

Button cannot be operated when

switch guard cover is closed,

preventing accidental operation

Wire lock-down feature further

prevents unintentional actuation of the

switch.

Lamps can be replaced with the

switch guard attached, without

special tools, saving maintenance

time

Can be used with alternate or

momentary action square or

rectangular .19 inch standard height

AML buttons

Shock resistant construction, for long,

maintenance-free life

AML76 switch guard protects square

and rectangular .19-inch standard

height pushbuttons from inadvertent

actuation. It is for use with standard

bezel type switches only.

See page 65 for mounting dimensions.

The switch guard cover is clear, polycar-

bonate thermoplastic through which the

button is easily visible. The word ‘‘lift’’ is

molded onto the top front edge of the

guard. The bracket is bright-finished

stainless steel.

The switch guard may be assembled to

the AML pushbutton before the switch is

installed in a panel. Or, the guard can be

assembled to a pushbutton already

mounted in a panel, providing the wiring

is sufficiently slack to raise the switch be-

zel above the panel; and if there is suffi-

cient clearance with adjacent units. PK

8522 contains installation instructions

and is shipped with each order.

AML switch guards may be mounted in

horizontal or vertical matrices. A wire

lock-down feature, using .020-inch diam-

eter locking wire, may be used as an addi-

tional protection.

SWITCH GUARD ORDER GUIDE

Guard Type*

Catalog Listing

Square

AML76C10T01P

Rectangular

AML76F10T01P

* The word ‘‘LIFT’’ is molded into the cover. If other

languages are desired contact the 800 number.

Note: Switch guard is not designed for use with

AML61 mounting hardware, AML71 barriers, or full

guard bezel switches.

CONNECTOR BLOCK

AML79CC

This connector block can be used with

square 1 and 2 pole AML21 and AML22

switches with .110 × .020 terminals to

enable plug-in wiring.

AML78 PANEL PLUGS

Plastic panel plugs (shown above) en-

able the user to provide for future needs

by punching extra panel holes. Finished

in matte black, they are the same height

as the standard AML bezel when snap-

ped in place from the panel front.

Panel plugs are only for use in individual

holes or with AML61 mounting hardware

in multi-station strips. (Use dummy hous-

ings in strip cutouts without AML61

mounting hardware.)

PANEL PLUG ORDER GUIDE

Plug Type

Catalog Listing

Square

AML78CB

Rectangular

AML78FB

AML78 DUMMY HOUSINGS

Dummy housings can be used to provide

for expansion needs in strip cutouts with-

out AML61 mounting hardware. They

have mounting clips, but there is no provi-

sion for switching or illumination.

DUMMY HOUSING ORDER GUIDE

Catalog

Dummy Housing Type*

Listing

Square

AML78C100

(Pushbutton style)

Rectangular

AML78F100

(Pushbutton style)

Rectangular

AML78J100

(Lens indicator style)

* Order AML51 Buttons/lenses for use with dummy

housings.

AML71SCB Datasheet(PDF) 2 Page - Honeywell Solid State Electronics Center

AML71SCB Datasheet(HTML) 2 Page - Honeywell Solid State Electronics Center

Html Pages

1 2

Datasheet Download

Link URL