o

Comes assembled and tested, includes a JST cable!

o

5V input via mini-B USB connector

o

For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)

o

500mA charge current, adjustable from 100mA to 1000mA by soldering in a resistor

o

Separate JST connectors for battery and load system so batteries don't have to be removed for

charging

o

Chip supports a 10K NTC thermistor which we have stuffed as a plain 10K. For people who

require temperature monitors (using high charge rates), remove the 10K and solder in the

thermistor in its place

o

0.1" (2.54mm) breakouts for the battery, DC, and status LEDs

o

Free 2-pin JST cable included!

o

Batteries and USB cable not included.

Technical Details 



Details:

o

Dimensions: 33mm x 35mm x 7mm (1.3in x 1.4in x 0.3in)

o

Weight: 5.7g ( 0.2oz)

                                                                      Engineered in NYC Adafruit ®