Features:

o

1 x 24V @ 2A relay (NC and NO terminals)

o

3 x 12-bit ADC @ 0-24V

o

3 x 24V tolerant buffered inputs

o

3 x 24V tolerant sinking outputs

o

3.5mm screw terminals

o

SPI pins broken out

o

Compatible with Raspberry Pi 3, 2, B+, A+, and Zero

o

Python library

o

Female header and broken out pins require soldering



Technical Details

Software

Pimoroni has made a super-simple to use Python library to take advantage of Automation pHAT's

multitudinous functions, with examples to get you started. In fact, Automation pHAT uses the same library

as Automation HAT, and it uses the presence (or absence) of the SN3218 LED driver chip to autodetect

which board (HAT or pHAT) is being used. Nifty!

Their input, output and relay examples show you how to read the analog and digital inputs, switch the

outputs on and off, and control the relay.

Notes

o

Loads for the buffered outputs should be switched on the ground side, i.e. 12/24V (from supply) -

> load -> output terminal -> ground (from supply)

o

The relay can tolerate up to 2A each and should be switched on the high side

Unassembled board dimensions: 65.0mm x 30.0mm x 10.0mm / 2.6" x 1.2" x 0.4"

Unassembled board weight: 8.8g / 0.3oz

For product support, replacement parts and warranty for Pimoroni products visit the Pimoroni forum or

contact Pimoroni directly.

                              Engineered in NYC Adafruit ® https://www.adafruit.com/product/3352 4‐12‐17