This enclosure was designed by Mike Doell. It's made of ultra-durable, super-glossy

polycarbonate, and is both good looking and tough enough to toss into your bookbag or

toolbox. It has slim openings for all your cables, an easy-to-remove beveled slot for your

Micro SD card, slots for both your Pi Camera and upcoming Display, and a space for

your GPIO cable to extend out from the Pi.

The Pi snaps into the base and the lid fits snugly onto the top. If you want to break out

your Pi you can use your case without the lid and add hats to your B+ with ease.

This case works for the Raspberry Pi Model B+ / Pi 2 only. It does not work for the

Raspberry Pi Model A or B. It does work with the model A+ but there will be a bit of

empty space of course, and you'll need to snake your USB cable or connector through the

front holes which may not work if the cable is bulky.

No Raspberry Pi included. This is just the base of the case and no lid is included.

Here's how to insert a Raspberry Pi into our case:



Technical Details

Note: As of Thursday, November 5th, 2015 the color/transparency on this

case has changed. We now sell this Raspberry Pi Model B+ / Pi 2 Case in a slightly

different shade of pink with more transparency.

o

Dimensions: 92mm x 63mm x 26mm / 3.6" x 2.5" x 1.0" 

o

Weight: 28g 

                                                                      Engineered in NYC Adafruit ®