This spool is ~11.5 meters of ~38 AWG thick magnet wire, just enough to do a

few projects. We recommend a spool for every engineer's workbench. Like all

magnet wire there is a thin enameled insulation. Some people like to remove it

with a small flame (from a lighter, say) but we've found that an easy way to

remove it is to melt a blob of solder onto your iron and then dip the end into the

blob for a few seconds. Remove the wire and it'll be both cleaned off and tinned!

 

TECHNICAL DETAILS



Diameter: 0.1mm



Spool weight: 4.2g



Wire length: ~11.5m / 450"

 

 

 

 

 

 

 

                                              https://www.adafruit.com/product/3522 9‐14‐18