62

Catalog 889092

Dimensions are in millimeters

Dimensions are shown for

USA: 1-800-522-6752

South America: 55-11-3611-1514

Revised 9-06

and inches unless otherwise

reference purposes only.

Canada: 1-905-470-4425

Hong Kong: 852-2735-1628

specified. Values in brackets

Specifications subject

Mexico: 01-800-733-8926

Japan: 81-44-844-8013

www.tycoelectronics.com

are standard equivalents.

to change.

C. America: 52-55-5-729-0425

UK: 44-141-810-8967

Fine Pitch SMT Stacking Connectors

(Parallel Board-to-Board)

Application Tooling for MICTOR Right Angle Connectors

Two operations must be

performed so that the

MICTOR right angle con-

nector can be successfully

installed on a PC board.

First, the board must be

slit for the ground/bus bar.

At the customer’s option,

this operation may be

done at the time of board

manufacture. Second, the

right angle connector

must be properly placed on

the board.

Tyco Electronics offers

bench-mount tooling for

slitting the PC board (see

below) and a free-standing

tool for installing the

connector (shown at the

right). AMP Application

Specification No. 114-11004

and Instruction Sheets are

available to provide the

necessary instructions and

recommendations for

proper tool use.

Application Specification

No. 114-13008 for Right

Angle.

Replacement Components for Tool Number 767511-1

Connector

Board Locator Pin

Plug

Receptacle

Support

Size

Inserter

Inserter

Pillar

(No. of Positions)

Round

Diamond

38

767523-1

767526-1

767514-1

767570-1

767522-1

76

767523-1

767526-1

767514-2

767570-2

767522-1

114

767523-1

767526-1

767514-3

767570-3

767522-1

152

767523-1

767526-1

767514-4

767570-4

767522-1

190

767523-1

767526-1

767514-5

767570-5

767522-1

228

767523-1

767526-1

767514-6

767570-6

767522-1

266

767523-1

767526-1

767514-7

767570-7

767522-1

Replacement Components for Tool Number 767527-1

Component

Quantity Required for Each Increment of

Part Number

Description

38 Positions (0.64 [.025] Centerline)

Slitting Punch (Set of 35)

5

767532-1

Die Insert* (Set of 7)

1

767530-1

* The die insert is located in the tool with a 3.18 x 28.58 [.125 x 1.125] long dowel and held in place with a

6-32 UNC-2A x 7.94 [5/16] long socket head cap screw (not included with replacement insert).

Application Tool Number 767511-1

(Instruction Sheet No. 408-4335)

Slitting Tool Number 767527-1

(Instruction Sheet No. 408-4334)

Note: Part Numbers are RoHS compliant.