DM300019 datasheet(5/50 Pages) MICROCHIP

5 / 50 page

dsPICDEM™ 80-PIN STARTER

DEVELOPMENT BOARD USER’S GUIDE

DS51584B-page 1

Preface

INTRODUCTION

This preface contains general information that will be useful to know before you use the

dsPICDEM™ 80-Pin Starter Development Board. Items discussed in this chapter include:

• Document Layout

• Conventions Used in this Guide

• Warranty Registration

• Recommended Reading

• The Microchip Web Site

• Development Systems Customer Change Notification Service

• Customer Support

• Document Revision History

DOCUMENT LAYOUT

This document describes how to use the dsPICDEM 80-Pin Starter Development

Board as a development tool to emulate and debug firmware on a target board. The

manual is organized as follows:

• Chapter 1: Introduction – This chapter introduces the dsPICDEM 80-Pin Starter

Development Board and provides a brief description of the hardware.

• Chapter 2: Tutorial – This chapter details the step-by-step process for getting

the dsPICDEM 80-Pin Starter Development Board up and running with the

MPLAB® In-Circuit Debugger 2 (MPLAB ICD 2).

• Chapter 3: Demonstration Program Operation – This chapter describes the

operational functionality of the sample code that is preprogrammed into the

dsPIC30F device.

• Chapter 4: dsPICDEM™ Development Board Hardware – This chapter describes

the hardware comprising the dsPICDEM 80-Pin Starter Development Board.

• Appendix A: Hardware Schematics – This appendix provides dsPICDEM

80-Pin Starter Development Board hardware layout and schematic diagrams.

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level.

For the most up-to-date information on development tools, see the MPLAB® IDE on-line help.

Select the Help menu, and then Topics to open a list of available on-line help files.

DM300019 Datasheet(PDF) 5 Page - Microchip Technology