LM4752

www.ti.com

SNAS006E – FEBRUARY 1999 – REVISED APRIL 2013

CONNECTION DIAGRAMS

Plastic Package (Top View)

See Package Number NDZ

7 Pin DDPAK Package (Top View)

See Package Number KTW

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

ABSOLUTE MAXIMUM RATINGS

(1) (2) (3)

Supply Voltage

40V

Input Voltage

±0.7V

Input Voltage at Output Pins(4)

GND – 0.4V

Output Current

Internally Limited

Power Dissipation(5)

62.5W

ESD Susceptibility(6)

2 kV

Junction Temperature

150°C

Soldering Information

NDZ Package (10 sec)

250°C

Storage Temperature

−40°C to 150°C

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is functional, but do not ensure specific performance limits. Electrical Characteristics state DC and AC electrical

specifications under particular test conditions which ensure specific performance limits. This assumes that the device is within the

Operating Ratings. Specifications are not ensured for parameters where no limit is given, however, the typical value is a good indication

of device performance.

(2)

If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and

specifications.

(3)

All voltages are measured with respect to the GND pin (4), unless otherwise specified.

(4)

The outputs of the LM4752 cannot be driven externally in any mode with a voltage lower than -0.4V below GND or permanent damage

to the LM4752 will result.

(5)

For operating at case temperatures above 25°C, the device must be derated based on a 150°C maximum junction temperature and a

thermal resistance of

θJC = 2°C/W (junction to case). Refer to the section DETERMINING MAXIMUM POWER DISSIPATION for more

information.

(6)

Human body model, 100 pF discharged through a 1.5 k

Ω resistor.

Copyright © 1999–2013, Texas Instruments Incorporated

Submit Documentation Feedback

3

Product Folder Links: LM4752