Sample Code

int ledPin = 13;

// Connect LED to pin 13

int switcher = 3;

// Connect Tilt sensor to Pin3

void setup() {

pinMode(ledPin, OUTPUT);

// Set digital pin 13 to output mode

pinMode(switcher, INPUT);

// Set digital pin 3 to input mode

}

void loop() {

if (digitalRead(switcher) == HIGH) //Read sensor value

digitalWrite(ledPin, HIGH);

// Turn on LED when the sensor is tilted

else

digitalWrite(ledPin, LOW);

// Turn off LED when the sensor is not trig

gered

}

 

 

 

 

 

 

 

 

Powered By DFRobot © 2008-2017