Wall-Mount Cabinets PROTEK SinglE-DOOR anD DOublE-HingED CabinETS

nVent.com/HOFFMAN

SUBJECT TO CHANGE WITHOUT NOTICE

netWorking

1

Spec-00712 I

Spec-00712

Protek single-Door, ul anD neMa tyPe 4, 12

inDustry stanDarDs

UL 508A Listed; File Number E61997

cUL Listed per CSA C22.2 No. 94; File Number E61997

Solid Door: Type 4 and 12

Window Door: Type 12

Solid Door, Stainless Steel: Type 4, 4X and 12

NEMA / EEMAC: Type 4, 4X or 12

IEC 60529, IP66 or IP55, IK 10

aPPliCation

PROTEK Single-Door cabinets are an excellent, off-the-shelf

choice for mounting 19-in. rack, panel-mounted devices or other

electronic equipment. The cabinets are designed to provide both

front and rear access to 19-in. rack-mounted equipment, while also

ensuring protection against water, dirt, corrosive agents and other

contaminants. PROTEK is an excellent choice for applications where

space is at a premium and the only option is wall mounting. PROTEK

comes in a broad range of sizes, materials and configurations to

meet many demanding applications.

Features

•

Solid-door cabinet provides complete physical and visual

protection

•

Window door, made of scratch-resistant safety glass, provides

visual monitoring of internal equipment while maintaining

equipment protection

•

All seams are fully welded and ground smooth

•

Doors are provided with ground studs to facilitate proper bonding

and grounding of the cabinet

•

Premium seamless, foam-in-place gasket prevents

contaminants from entering the cabinet

•

Keylocking wing knob is included on painted steel offering,

providing access control to the cabinet; two keys are included

with each cabinet

•

Stainless steel cabinet is provided with a quarter-turn slotted

latch

•

One set of plated, self-grounding, tapped 10-32 rack angles per

EIA universal spacing standards, which can be adjusted front-

to-back, is provided with each center section of the cabinet;

additional tapped- or square-hole rack angles can be added to

the cabinet to provide additional mounting

•

Wall section welded panel studs which accommodate standard

panels (steel and wood available), can be ordered separately

sPeCiFiCations

•

Doors and body made of 14 gauge steel

•

Stainless steel enclosures made from Type 304 stainless steel

•

Window made of .25-in. thick, scratch- and impact-resistant

safety glass

•

Rack angles made of plated 12 gauge steel

•

M6 ground studs on the door and body are masked from paint

•

Twenty 10-32 screws included with cabinet

•

Foam-in-place gasket made of durable polyurethane

FinisH

•

Pretreated steel coated with RAL 7035 light-gray, low-gloss,

lightly textured polyester powder paint

•

Stainless steel is provided with a smooth-grain finish

loaD rating

Height Maximum load rating

24 in.

200 lb./90.7 kg

36 in.

300 lb./136.1 kg

48 in.

400 lb./181.4 kg

aCCessories

Locks and handles

Panels (steel and wood)

Grounding kits

Power Distribution Units (PDUs)

Rack angles

Bulletin: DWS12

Technical Operating Information AC Unit (T150116G100)

  replacement Filter no. 10100091

Hz

Voltage VAC

Phase

BTU/Hr @ Max. Ambient Temp. (watts)

Full Load Amp

Max. Ambient Temp. (ºF)

Max. Ambient Temp. (ºC)

Cord and Plug

60 (50)

115

1

800 (325 watts)

3.6 (3.8)

131 (125)

52 (52)

25-in. cord length 5-15 plug