9.2.2.4 Input Bias Current Return Path

The input impedance of the INA12x is extremely high: approximately 10 GΩ. However, a path must be provided

for the input bias current of both inputs. This input bias current is approximately ±2 nA. High input impedance

means that this input bias current changes very little with varying input voltage.

Input circuitry must provide a path for this input bias current for proper operation. Figure 9-3 shows various

provisions for an input bias current path. Without a bias current path, the inputs float to a potential that exceeds

the common-mode range, and the input amplifiers saturate.

If the differential source resistance is low, the bias current return path can be connected to one input (see

the thermocouple example in Figure 9-3). With higher source impedance, use two equal resistors to provide

a balanced input, with possible advantages of lower input offset voltage due to bias current, and better high-

frequency common-mode rejection.

For more details about why a valid input bias current return path is necessary, see the Importance of Input Bias

Current Return Paths in Instrumentation Amplifier Applications application note.

47kΩ

47kΩ

10kΩ

Microphone,

Hydrophone

etc.

Thermocouple

Center−tap provides

bias current return.

INA128

INA128

INA128

Figure 9-3. Providing an Input Common-Mode Current Path

www.ti.com

INA128, INA129

SBOS051F – OCTOBER 1995 – REVISED MAY 2022

Copyright © 2022 Texas Instruments Incorporated

Submit Document Feedback

17

Product Folder Links: INA128 INA129