Lens Mount

Page <1>

31/05/12 V1.1

www.element14.com

www.farnell.com

www.newark.com

Dimensions : Inches (Millimetres)

Specifications:

Material

: Polycarbonate

Design

: Standard profile lens using fresnel rings and straighted lines

Mounting

: Mounts through the front of panel

: Mounting holes should be deburred but not chamfered

: Lens mounts in a 0.25 ±0.002 (6.35 mm) hole on 3 / 8 inches centres

: Panel thickness 1 / 16 to 1 / 8 inches

: Standard metal or plastic washer can be used to increase panel

: thickness if necessary

Part Number Table

Description

Part Number

Lens / Mount, Red

CLF280RTP

Lens / Mount, Amber

CLF280ATP

Lens / Mount, Green

CLF280GTP

Lens / Mount, Clear

CLF280CTP

Part Number Explanation :

Colour : RTP = Red Transparent

ATP = Amber Transparent

GTP = Green Transparent

CTP = Clear Transparent

Model

CLF280

Colour

RTP

Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of

it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces

all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use

made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.

Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)

is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.