Data Sheet

MAX74810

analog.com

Rev. 0

7 of 23

ABSOLUTE MAXIMUM RATINGS

TA = 25°C, unless otherwise specified.

Table 3. Absolute Maximum Ratings

PARAMETER

RATING

Supply Voltage

57V

Input Voltage

(V−) – 0.3V to (V+) + 0.3V

Input Current1

±10mA

Input Current (duration < 1 sec)

±100mA

Differential Input Voltage

±5V

Output Short-Circuit Duration to Ground

Indefinite

Temperature Range Storage

−65°C to +150°C

Temperature Range Operating

−40°C to +125°C

Temperature Range Junction

−65°C to +150°C

Lead Temperature (Soldering, 60 sec)

300°C

1

The input pins have clamp diodes to the power supply pins. Limit the input current to ±10mA or less

whenever input signals exceed the power supply rail by 300mV.

Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product.

This is a stress rating only; functional operation of the product at these or any other conditions above those indicated

in the operational section of this specification is not implied. Operation beyond the maximum operating conditions

for extended periods may affect product reliability.

Thermal Resistance

θJA is specified for the worst case conditions, that is, a device soldered in a circuit board for surface-mount

packages using a standard 4-layer JEDEC board.

Table 4. Thermal Resistance

PACKAGE TYPE

θJA

θJC

UNIT

RM-8

194

38

°C/W

Power Sequencing

Apply the op amp supplies simultaneously; if this is not possible, apply the positive power supply first, before the

negative power supply.

ESD Caution

ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can

discharge without detection. Although this product features patented or proprietary

protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore,

proper ESD precautions should be taken to avoid performance degradation or loss of

functionality.