PCAN-USB datasheet(5/18 Pages) NXP

Part #	PCAN-USB

Description	Battery Management System (BMS) with MPC5775B-EVB and RD33771CDSTEVB

PDF	18 Pages

Scroll/Zoom	100%

Manufacturer	NXP [NXP Semiconductors]

Direct Link	http://www.nxp.com

Logo

5 / 18 page

www.nxp.com

Cable_1

Cable_2

STEP-BY-STEP INSTRUCTIONS FOR BMS DEMO SETUP

1 Connect BATT-

14CEMULATOR and

RD33771CDSTEVB

Connect the battery cell emulator board

(BATT-14CEMULATOR) and the cell

controller board (RDCV33771C) using

Cable_1.

2 Connect RD33771CDSTEVB

and MPC5775B-EVB for

TPL link

Connect the cell controller board with

battery management board using the

Cable_2 as shown in the figure to the

right. This will establish the TPL link for

communication.

Either J1 or J2 can be connected to the

RD33771CDSTEVB.

User must connect positive (+) terminal of

MPC5775B-EVB’s BMS interface connector

(J118 – pin 3,4 ) to BMS cell controller

module positive (+) terminal and negative

terminal to negative terminal as shown in

the next slide.

PCAN-USB Datasheet(PDF) 5 Page - NXP Semiconductors