P6SMB Series

www.vishay.com

Vishay General Semiconductor

Revision: 20-Jul-2020

1

Document Number: 88370

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Surface-Mount TRANSZORB®

Transient Voltage Suppressors

LINKS TO ADDITIONAL RESOURCES

DEVICES FOR BIDIRECTION APPLICATIONS

For bidirectional devices use CA suffix (e.g. P6SMB10CA).

Electrical characteristics apply in both directions.

FEATURES

• Low profile package

• Ideal for automated placement

• Glass passivated chip junction

• Available in unidirectional and bidirectional

• 600 W peak pulse power capability with a

10/1000 μs waveform, repetitive rate (duty cycle): 0.01 %

• Excellent clamping capability

• Very fast response time

• Low incremental surge resistance

• Meets MSL level 1, per J-STD-020, LF maximum peak

of 260 °C

• AEC-Q101 qualified available

- Automotive ordering code: base P/NHE3 or P/NHM3

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and lighting

on ICs, MOSFET, signal lines of sensor units for consumer,

computer, industrial, and telecommunication.

MECHANICAL DATA

Case:

SMB (DO-214AA)

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, commercial grade

Base P/N-M3 - halogen-free, RoHS-compliant, commercial

grade

Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified

Base P/NHM3_X - halogen-free, RoHS-compliant, and

AEC-Q101 qualified

(“_X” denotes revision code e.g. A, B, ...)

Terminals:

matte

tin

plated

leads,

solderable

per

J-STD-002 and JESD 22-B102

E3, M3, HE3, and HM3 suffix meets JESD 201 class 2

whisker test

Polarity:

for unidirectional types the band denotes cathode

end, no marking on bidirectional types

Notes

(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2

(2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal

PRIMARY CHARACTERISTICS

VWM (unidirectional)

5.8 V to 459 V

VWM (bidirectional)

5.8 V to 185 V

VBR (unidirectional)

6.8 V to 540 V

VBR (bidirectional)

6.8 V to 220 V

PPPM

600 W

PD

5.0 W

IFSM (unidirectional only)

100 A

TJ max.

150 °C

Polarity

Unidirectional, bidirectional

Package

SMB (DO-214AA)

SMB (DO-214AA)

333

DDD3 D

3D Models

Available

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER

SYMBOL

VALUE

UNIT

Peak power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1)

PPPM

600

W

Peak pulse current with a 10/1000 μs waveform (1)

IPPM

See next table

A

Power dissipation on infinite heatsink at TA = 50 °C

PD

5.0

W

Peak forward surge current 8.3 ms single half sine-wave unidirectional only (2)

IFSM

100

A

Operating junction and storage temperature range

TJ, TSTG

-65 to +150

°C