PMT2 Panel Mount Power Supply

PMT2 100W series / PMT-□V100W2B□□

TECHNICAL DATASHEET

All parameters are specified at 25°C ambient and nominal AC input unless otherwise indicated.

www.DeltaPSU.com (April 2020, Rev. 05)

4

Reliability Data

MTBF

> 700,000 hrs as per Telcordia SR-332

I/P: 230Vac, O/P: 100% Load, Ta: 25°C)

Expected Cap Life Time

10 years (230Vac, 50% load @ 40°C)

Safety Standards / Directives

Safety Entry Low Voltage

SELV

Electrical Safety

TUV Bauart

cTUVus

CB scheme

CCC

KC

EAC

EN 62368-1, EN60335-1, EN 61558-1/-2-16

UL 62368-1 and CAN/CSA C22.2 No. 62368-1

IEC 62368-1, IEC 60950-1, IEC 60335-1, IEC 61558-1/-2-16

GB4943

K 60950-1

TP TC 004/2011

CE

In conformance with EMC Directive 2014/30/EU and Low Voltage Directive

2014/35/EU

Galvanic Isolation

Input to Output 4.0KVac

Input to Ground 2.0KVac

Output to Ground 1.25KVac

EMC

Emissions (CE & RE)

CISPR 32, EN 55032, EN 61000-6-4, KN32, AS/NZS CISPR32

Compliance to EN55014-1, FCC Title 47, EN 61000-6-3 : Class B

Immunity

EN 55035, KN35, EN 61000-6-2

Compliance to EN55014-2,EN 61000-6-1

Electrostatic Discharge

IEC 61000-4-2 Level 4 Criteria A1)

Air Discharge: 15kV

Contact Discharge: 8kV

Radiated Field

IEC 61000-4-3 Level 3 Criteria A1)

80MHz-1GHz, 10V/M with 1kHz tone / 80% modulation

Electrical Fast Transient / Burst

IEC 61000-4-4 Level 3 Criteria A1)

2kV

Surge

IEC 61000-4-5 Level 4 Criteria A1)

Common Mode4): 4kV

Differential Mode5): 2kV

Conducted

IEC 61000-4-6 Level 3 Criteria A1)

150kHz-80MHz, 10Vrms

Power Frequency Magnetic

Fields

IEC 61000-4-8 Level 4 Criteria A1)

30A/Meter

Voltage Dips and Interruptions

IEC 61000-4-11 0% residual; 1 cycle, Criteria B

40% residual; 10 cycle, Criteria C3)

70% residual; 25 cycle, Criteria C3)

Harmonic Current Emission

IEC/EN 61000-3-2 Class A

1) Criteria A: Normal performance within the specification limits

2) Criteria B: Output out of regulation, or shuts down during test. Automatically restored to normal operation after test.

3) Criteria C: Output out of regulation, shuts down during test (Need to recycle AC power cord to normal operation after test)

4) Asymmetrical: Common mode (Line to earth)

5) Symmetrical: Differential mode (Line to line)