2 / 4 page
CY3670
Document Number: 38-07410 Rev. *A
Page 2 of 4
Setup
Hardware
The CY3670 FTG Programming Kit has a very simple setup procedure. As shown in Figure 2, the two connections are the power and
the RS232 serial cable to the computer. The programmer must be connected to a PC through a serial port and must receive power
through the included AC/DC adapter. The AC/DC adapter is connected to a standard 110V/220V wall outlet. The final step is to use
the appropriate adapter for the device to be programmed.
Figure 3 on page 3 is a close up of the socket and shows the correct orientation for placing the device in the socket. The device must
be placed according to the device placement that appears on each adapter. The dots correspond to pin 1 of the device.
Figure 2. FTG Programming Kit Setup [1]
IBM Compatible
110V
220V
AC/DC
Adapter
text
ON
Busy
Cypress FTG Programmer - CY3670
Programs: CY2071AF/CY2291F/CY2292F/
CY2907F8/CY2907F14
Note
1. When plugging the AC/DC adapter into an outlet, be sure to set the 110V/220V switch to the correct setting (110V in the US) as shown on the power adapter in Figure 2.
If no switch exists, it automatically selects between 110V and 220V.
[+] Feedback
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
