M25PE16-VMP6TP datasheet(47/58 Pages) NUMONYX

47 / 58 page

M25PE16

DC and AC parameters

47/58

DC and AC parameters

This section summarizes the operating and measurement conditions, and the DC and AC

characteristics of the device. The parameters in the DC and AC characteristic tables that

follow are derived from tests performed under the measurement conditions summarized in

the relevant tables. Designers should check that the operating conditions in their circuit

match the measurement conditions when relying on the quoted parameters.

Output Hi-Z is defined as the point where data out is no longer driven.

Figure 24.

AC measurement I/O waveform

Table 14.

Operating conditions

Symbol

Parameter

Min.

Max.

Unit

VCC

Supply voltage

2.7

3.6

Ambient operating temperature

–40

°C

Table 15.

AC measurement conditions

Symbol

Parameter

Min.

Max.

Unit

Load capacitance

Input rise and fall times

Input pulse voltages

0.2VCC to 0.8VCC

Input and output timing reference voltages

0.3VCC to 0.7VCC

Table 16.

Capacitance(1)

Sampled only, not 100% tested, at TA=25 °C and a frequency of 33 MHz.

Symbol

Parameter

Test condition

Min.

Max.

Unit

COUT

Output capacitance (Q)

VOUT = 0 V

CIN

Input capacitance (other pins)

VIN = 0 V

AI00825B

0.8VCC

0.2VCC

0.7VCC

0.3VCC

Input and output

timing reference levels

Input levels

M25PE16-VMP6TP Datasheet(PDF) 47 Page - Numonyx B.V

M25PE16-VMP6TP Datasheet(HTML) 47 Page - Numonyx B.V

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

Datasheet Download

Link URL