SW6206

Bidirectional Fast Charge Power Bank

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD.

May, 2022 - DS047_v1.5

12

CCL/WLED pin is configured to WLED driver, or configured to PD fast input function of Lightning

port.

9.5. Type C Interface

The SW6206 integrates Type-C logic controller include try.SRC role. When SOURCE is attached,

charger will automatically turn on to charge battery. When SOURCE is detached, charger will

automatically turn off. When SINK is attached, boost will automatically turn on to supply device.

When SINK is detached, boost will turn off .

When SINK is attached and boost turns on , the SW6206 works in SOURCE role, and will broadcast

power level of 3A. if adapter inserts in Micro-B or Lightning port and boost not turns on, the SW6206

will also broadcast power level of 3A.

9.6. PD Fast Charge

The SW6206 integrates PPS/PD3.0/PD2.0 fast charge protocol, supports input and output fast charge.

Its output supports two APDOs: PPS0 for 5~5.9V@3A, and PPS1 for 5~11V@2A, and three fix PDOs:

5V@3A/2A/2.4A/2.5A, 9V@2A/2.22A/2.33A/2.4A, 12V@1.5A/1.6A/1.67A/1.75A. It also supports

5V/9V/12V input voltage.

9.7. QC3.0/QC2.0 Fast Charge

The SW6206 integrates QC4+/QC4/QC3.0/QC2.0 fast charge protocol. It supports Class A, while

QC2.0 supporting 5V/9V/12V output voltage and QC3.0 supporting 5V~12V output voltage,

200mV/Step.

QC2.0/QC3.0 will output voltage base on DP/DM voltage:

Device

SW6206

DP

DM

VOUT

Note

3.3V

3.3V

previous voltage

not respond

0.6V

0.6V

12V

3.3V

0.6V

9V