MP2321 – 19V, 2A, LOW IQ, STEP-DOWN CONVERTER

MP2321 Rev. 1.1

www.MonolithicPower.com

20

5/24/2019

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2019 MPS. All Rights Reserved.

TYPICAL APPLICATION CIRCUITS

Figure 15: VIN = 12V, VOUT = 1.0V, IOUT = 2A, FS = 500kHz

NOTE:

a.

Use R6 = 130kΩ to set forced PWM. Use R7 = 147kΩ to set auto PFM/PWM. The recommended R6 and R7 values are based on

Equation (12) and Equation (13) and optimized according to test results.

b.

Recommend to pull-up PG to IC VCC pin. If need pull-up PG to external power supply, please refer to the PG description in

application information section.

Figure 16: VIN = 12V, VOUT = 1.2V, IOUT = 2A, FS = 500kHz

NOTE:

a.

Use R6 = 158kΩ to set forced PWM. Use R7 = 180kΩ to set auto PFM/PWM. The recommended R6 and R7 values are based on

Equation (12) and Equation (13) and optimized according to test results.

b.

Recommend to pull-up PG to IC VCC pin. If need pull-up PG to external power supply, please refer to the PG description in

application information section.