LD43DR

Data sheet issued: 8 April 2026 | Issue 7

T: +44 (0)1322 527 629

E: light@lightgraphix.co.uk

www.lightgraphix.co.uk

Please refer to our finishes guide for full details

AVAILABLE FINISHES

POLISHED & PASSIVATED

316 STAINLESS STEEL

>

Marine Grade 316 Steel

>

Mirror like finish

>

Extremely durable

>

Passivated to extensively

prolong resistance to

corrosion and brown

stains caused by oxidation

in marine environments

>

Interior & exterior use

316 STAINLESS STEEL

>

Marine grade 316 Steel

>

Standard machined finish

>

Extremely durable

>

Passivation recommended

for marine environments

to prevent corrosion and

build up of brown stains

caused by oxidation

>

Interior & exterior use

FLAMED SOLID BRONZE

>

Solid Bronze

>

Hand finished Flamed

Bronze unique to

LightGraphix

>

Extremely durable with

very high corrosion

resistance

>

Please note a natural

dark patination layer

will form after long

term exposure to the

elements, the extent of

this discolouration will be

dependant on its location.

>

Interior & exterior use

MACHINED BRASS

>

Solid CZ121 Brass

>

Standard machined finish

>

Corrosion resistance rated

fair to excellent

>

Please note a natural

green/brown patination

layer will form after long

term exposure to the

elements, the extent of

this discolouration will be

dependant on its location.

>

Interior & exterior use

PAINT FINISH - POWDER COAT

>

White (RAL 9016), Black

(RAL 9005), Classic Bronze

(YM262E), Gunmetal Grey

(RAL 7021) Textured Mars

Bronze (SX350F), Textured

Fir Green (RAL 6009),

and other RAL colours

available

>

Smooth matt texture

unless stated otherwise

>

Not recommended for

footlights in high traffic

areas

>

Interior & exterior use

DIMENSIONS AND FIXING ACCESSORIES

Dimensions in mm

/480GT Ground tube

The in-ground tube has been designed for applications where a recessed uplighter is

required in soil or gravel terrain. The tube can be buried with the necessary wiring,

and then the fitting installed after the landscaping work has been completed.

It is supplied with the fixing sleeve bonded into the tube, and can be cut down on site.

Ø52

Ø34

Ø81

/484GT

In-ground Tube

25

25

25

Ø36.6

Ø50

Ø83.3

200

220

300

0.8

0.8

0.75

/476GT

In-ground Tube

/480GT

In-ground Tube

0.8

200

Ø37

25

0.8

200

25

Ø37

/SC Spring clip fixing

Useful for plinth or downlight applications

2.4

58

Cut-Out

Ø32

68

33

/480 Fixing Sleeve

with ‘O’ rings

Ø36

2.4

58

68

Ø27

Cut-Out

Ø32

/SC Spring Clips

33

Ø36

Ø27

Scaled Drawings.

Use common elemtents, such as

surfaces. But keep cables to scale.

Reduce lines, simplify drawing.

LD43DR

LD43DR

with

/GS43 Glare Shield

33

2.4

58

Cut-Out

Ø32

68

33

/480 Fixing Sleeve

with ‘O’ rings

Ø36

2.4

58

68

Ø27

Cut-Out

Ø32

/SC Spring Clips

33

Ø36

Ø27

Scaled Drawings.

Use common elemtents, such as

surfaces. But keep cables to scale.

Reduce lines, simplify drawing.

LD43DR

LD43DR

with

/GS43 Glare Shield

33

2.4

58

68

Cut-Out

Ø32

Ø36

Ø27

33

/480 O-rings and sleeve

A more robust and water tight method of

fixing, for in ground applications

2.4

58

Cut-Out

Ø32

68

33

/480 Fixing Sleeve

with ‘O’ rings

Ø36

2.4

58

68

Ø27

Cut-Out

Ø32

/SC Spring Clips

33

Ø36

Ø27

Scaled Drawings.

Use common elemtents, such as

surfaces. But keep cables to scale.

Reduce lines, simplify drawing.

LD43DR

LD43DR

with

/GS43 Glare Shield

33

2.4

58

Cut-Out

Ø32

68

33

/480 Fixing Sleeve

with ‘O’ rings

Ø36

2.4

58

68

Ø27

Cut-Out

Ø32

/SC Spring Clips

33

Ø36

Ø27

Scaled Drawings.

Use common elemtents, such as

surfaces. But keep cables to scale.

Reduce lines, simplify drawing.

LD43DR

LD43DR

with

/GS43 Glare Shield

33

2.4

Cut-Out

Ø32

58

68

Ø27

33

Ø36