4

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

GENERAL SAFETY RULES

WORK ENVIRONMENT

1. Keep the work area clean and tidy.

2. Dress appropriately - DO NOT wear loose clothing or jewellery. Tie long hair out

of the way.

3. Keep children and visitors away - DO NOT let children handle the blow gun.

4. DO NOT operate the blow gun where there are flammable liquids or gases.

USE OF AIR POWERED TOOLS

1. Stay alert and use common sense - do not operate this blow gun when you are

tired or under the influence of alcohol, drugs or medication.

2. ALWAYS wear eye protectors when using the blow gun. Eye protectors

must provide protection from flying particles from the front and the

side.

3. DO NOT use the blow gun when other persons or animals are nearby or may be

hit by flying debris caused by the blow gun.

4. DO NOT overreach - Keep proper footing and balance at all times.

5. DO NOT use oxygen, CO2, combustible gasses or any type of bottled gas as a

source of power.

6. DO NOT connect the air supply hose with your finger on the trigger.

7. DO NOT exceed the maximum pressure for the blow gun of 90 psi / 6.2 bar.

8. Keep the air supply hose away from heat, oil and sharp edges.

9. DO NOT fit the blow gun to any stand or clamping device that may damage it.

10. Check air hoses for leaks or worn condition before use and ensure that all

connections are secure.

11. DO NOT use for any purpose than that described in this manual.

12. DO NOT discharge this blow gun at any persons or animals.

13. DO NOT point directly at a person’s skin or at a fire.

14. DO NOT carry out any alterations or modifications to the blow gun.

CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN

PERSONAL INJURY AND/OR DAMAGE TO PROPERTY.