DIO20872B

Version 1.2, Oct 2024

www.dioo.com

© 2024 DIOO MICROCIRCUITS CO., LTD.

8

Figure 11. Non-Inverting configuration resistor networks

When VIN is less than VREF, the output is low. For the output to switch from low to high, VIN must rise above

the VIN1 threshold. Use Equation (4) to calculate VIN1.

���������1=���1× ���������������2 +������������

(4)

When VIN is greater than VREF, the output is high. For the comparator to switch back to a low state, VIN must

drop below VIN2. Use Equation (5) to calculate VIN2.

���������2= ������������×���1+���2−���������×���1

���2

(5)

The hysteresis of this circuit is the difference between VIN1 and VIN2, as shown in Equation (6).

∆���������=���������× ���1���2

(6)