AS72651

Errata Sheet

ams Errata Sheet

Page 4

[v1-07] 2018-May-15

Document Feedback

Command

Response

Description and Parameters

ATLED5

<100|0>OK

Reads AS72653 LED_DRV setting: 100=ON, 0=OFF

Workaround

This functionality cannot be implemented using the current firmware update and will be updated in the

next firmware release 11Vx.x and later.

4. Deviation 4: AT commands page 51 figure. 51

Description: Software reset functionality- ATRST is replaced by new command in new firmware update.

AT command ATRST

Command

Response

Description and Parameters

ATRST

None

Software Reset- no response

Workaround:

This functionality is cannot be implemented using the current firmware update and is replaced with a

new command. ATRST replaced by ATSRST for the software reset.

5. Deviation 5: AT commands page 51 figure. 51

Description: This functionality will not work.

AT command ATINTRP

Command

Response

Description and Parameters

ATINTRP=

<value>

OK

Enables AS72651 interrupt operation; 1=ON, 0=OFF

ATINTRP

<100|0>OK

Reads AS72651 Interrupt mode; 1=ON, 0=OFF

Workaround:

This functionality cannot be implemented using the current firmware update and will be updated in the

next firmware release 11Vx.x and later.