• For use with both 2 ft. x 2 ft. and 2 ft. x 4 ft.

suspended tile ceilings (support rail crossbar

included for 2 ft. x 4 ft. suspended tile ceilings)

• Finely perforated grille covers entire front of speaker

• Fully enclosed, industrial grade steel construction

• Self-contained 1-watt amplifier

• 8" main cone speaker, with secondary cone

• Front-mounted, recessed volume control

• Non-reflective finish, available in off-white (ACD2X2)

and bright white (ACD2X2U)

• Seismic attachment points

• Plenum-Rated; Complies with UL-2043

Features

Description

Specifications subject to change without notice.

© 2006-2014 Bogen Communications, Inc.

54-8023-23E 1411

Self-Amplified Drop-In

Ceiling Speaker

Bogen's ACD2X2 Drop-In Ceiling Speaker is a full-range, 1-watt, self-amplified speaker that is quick and easy

to install. Simply wire it and drop it into place. Available in off-white (ACD2X2) and bright white (ACD2X2U).

The ACD2X2 is 2' x 2', designed to fit perfectly into place in 2' x 2' ceiling grids - without needing to cut ceiling

tiles. The ACD2X2 can also be easily installed in 2' x 4' ceiling grids using the included support rail.

The speaker shall be a Bogen Model ACD2X2 (or

ACD2X2U) Drop-In Self-Amplified Ceiling Speaker,

which shall be fully enclosed and constructed of indus-

trial grade steel. It shall be comprised of a damped

high-compliance factory-mounted 8" loudspeaker that

shall consist of an 8" treated paper cone and a

10-ounce magnet, including a secondary cone.

The unit shall have a 1-watt amplifier. The typical

current consumption shall be 1 CU (50 mA). Frequency

response shall be 95 Hz - 12 kHz. Input sensitivity shall

be 125 mVrms. Input impedance shall be 2k ohms.

Dispersion shall be 100°.

The speaker shall have a non-reflective, off-white (or

bright white for ACD2X2U) metal finish grille with a

recessed volume control accessible through front grille.

It shall include 4 seismic attachment points.

The speaker assembly will fit into 2' x 2' and 2' x 4' ceil-

ing tiles. For 2' x 2' installations, a support rail shall not

be needed and no cuts to the ceiling shall be neces-

sary. For 2' x 4' installations, a single cut to the ceiling

tile and an included support rail shall be needed.

The speaker shall measure 23-7/8" W x 5" H x

23-7/8" D and shall weigh 12 lb.

Architect and

Engineer

Specifications

Technical

Specifications

Max. SPL: 94 dB (1m)

Frequency Response: 95 Hz - 12 kHz

Supply Voltage: 24V DC

Typical Current Units: 1 CU (50 mA)

Idle Current: 5 mA (nominal)

Input Sensitivity: 125 mVrms

Input Impedance: 2k ohms

www.bogen.com

Dispersion: 100°

Cone: 8" cone speaker, with secondary cone

Magnet Weight: 10 oz.

Connection: Wire leads via wire nuts (included)

Dimensions: 23 -7/8" W x 5" H x 23 -7/8" D

Product Weight: 12 lb.

with back can and recessed

volume control

Models

ACD2X2, ACD2X2U