Driver Complement:

Low Frequency

: One Apogee 10"(254mm) permanent magnet cone-

type driver is treated with a waterproofing compound, providing

resistance to moisture, and enabling long-term stability of cone

resonance and cone mass parameters

High Frequency

: One Apogee 1.75" (45mm) voice coil, 1" (25mm)

exit horn-loaded compression driver treated with Ferrofluid

Input Connectors:

Barrier strip, screw type #8

Compatible Processors:

AF I Main Frame Controller Chassis (using AF I-3 Module) or DLC24

Handles:

Two handles – one top, one bottom – designed as an integral part of

the enclosure (no moving parts)

Grille:

Highly durable, quality finish on perforated steel (aluminum on

SX version)

Rigging Hardware:

Fourteen rigging points, four each on top and bottom, two each on

both sides and rear, all backed with 16-gauge steel; points can be

type 3/8"-16 or M10 thread

Finish:

Textured high-strength black or white epoxy paint; other colors

optional

Enclosure Type:

30

° trapezoidal, optimally-vented bass

Cabinet Construction:

Multi-ply hardwood with stainless steel fasteners

Options/Accessories:

• AF I Controller Processor or DLC24 Digital Processor

• SX weather treatment for use in limited exposure enclosures

• Assorted rigging components

Contractor Series

Loudspeaker System

Engineering Data:

Description:

Format:

Passive/Two-way

Dispersion:

AF

I-3

H:

60

° x V: 45° (rotatable)

AF

I-3W H: 90° x V: 45° (rotatable)

Frequency Response (1m on axis):

61

Hz to 20 kHz ± 3 dB

Max. SPL (@1m):

123

dB cont./129 dB peak

PTML (peak transient mechanical limit):

137

dB

Sensitivity (1W @ 1m):

98

dB SPL/100 Hz to 4 kHZ

Nominal Impedance:

8

ohms

Max. Power Handling:

300

W cont./1200W peak

Dimensions:

front:

13.5

"(343mm) W x 25.5"(648mm) H

rear:

8.2

"(207mm) W x 25.5"(648mm) H

depth: 12.1"(307mm)

Weight:

45

lb. (21 kg)

The AFI-3 offers exceptional output power

with excellent high frequency pattern control.

With the addition of a subwoofer, the AFI-3 can

handle high-level music in clubs and discos.

The AFI-3 high frequency horn is available in a

60

° x 45° or 90° x 45° pattern. These horns and

the logo plate are rotatable to allow

alternative hanging positions.

AF

I-3