OUTLINE

The P-710 is a light, compact, fluororesin body purgemeter ideal for

measuring various corrosive solutions.

MAJOR APPLICATIONS

General purpose (small flow rate)

STANDARD SPECIFICATIONS

Measuring fluid

Gases

Liquids

Measuring range

Air Min. 50 to 500 mL/min（nor）

Max. 2 to 20 L/min（nor）

Water Min. 3 to 30 mL/min

Max. 0.4 to 2 L/min

・When selecting a flow range, refer to "Index &

Quick Reference for P Series Purgemeters"

(TG-S0001).

・When selecting a flow range, refer to the

standard flow rate.

Range ability

10:1 (10:2 for some models)

Indication accuracy

±5％ F.S.

Fluid pressure

Max. 0.5MPa

Fluid temperature

Max. 70℃

Material

Meter body

ETFE（Rc1/8）

（Standard）,PFA（Pillar fitting）

Tapered tube Heat-resistant glass（Standard）,PCTFE

Gasket

PTFE

Support

Polyacetal（Standard）,PPS

Cover

Polycarbonate

Process Connection

Rc : 1/8"(Standard）

Pillar fitting : (OD) 6.35mm, 6mm, 8mm

Mounting

Screw mount on the panel front (Standard)

Panel embedded mounting

Mass

approx. 0.1kg

ALARM CONTACT AND OUTPUT

Type

Availability

Reed switch type alarm unit

General

×

UL-approved

×

PAU optical alarm unit

○

For CE approval, refer to "Index & Quick Reference for P Series

Purgemeters" (TG-S0001).

STANDARD FLOW RATE TABLE

When the fluid pressure is other than 0 MPa, refer to "Index & Quick Reference for P

Series Purgemeters" (TG-S0001).

For tapered tube material code of G

For tapered tube

material code of T

Air (0ºC, 0 MPa)

Water

Water

3 to 30 mL/min

（Water）

5 to 50 mL/min

50 to 500 mL/min（nor） 10 to 100 mL/min

0.1 to 1

L/min

（nor） 20 to 200 mL/min

0.2 to 2

L/min

（nor） 30 to 300 mL/min

0.3 to 3

L/min

（nor） 50 to 500 mL/min

50 to 500 mL/min

0.5 to 5

L/min

（nor） 0.1 to 1

L/min

0.1 to 1

L/min

1 to 10 L/min

（nor）0.12 to 1.2 L/min＊

0.12 to 1.2 L/min

2 to 20 L/min

（nor） 0.4 to 2

L/min

0.4 to 2

L/min

Although other flow rate specifications are available, some flow ranges

need to be changed. Contact us for details.

＊

Ranges of 0.12 to 1.2 L/min or higher are applicable only to models

with a valve code of 0 or U.

BASIC MODEL CODE

Model Code

Descriptions

Notes

P-710 –

□ □ – □ □ – □ □

Valve

– 0

Not provided

Refer to "Index &

Quick Reference

for P Series

Purgemeters"

(TG-S0001).

– L

Inlet (gas for

atmospheric

pressure scale)

– U

Outlet (gas for

pressure scale

or for negative

pressure on the

secondary side)

– Z

Special

Alarm

output

0

Not provided

E

PAU alarm unit

provided

Z

Special

Tapered tube

material

– G

Heat-resistant

glass (Standard)

– T

PCTFE

Cannot be

specified with gas

applications, a valve

code of L, and an

alarm output code

of E or Z

Gasket material

T

PTFE

Cushion:

Chloroprene rubber

(CR) or Fluoro

rubber

Process connection

– R 1

Rc1/8"

(Standard)

– T

A ø6.35

× t1

Pillar fitting (Super

type)

B ø6

× t1

C ø8

× t1

– P

A ø6.35

× t1.2

Pillar fitting (Super

300 type)

B ø6

× t1

– Z Z Special

OTHER AVAILABLE OPTIONS

You can specify the following options:

Double graduations, special graduations, various joint types, etc. For

details, refer to "Index & Quick Reference for P Series Purgemeters"

(TG-S0001).

All-fluororesin, highly corrosion-resistant purgemeter

for measuring liquids and gases

P-710

Purgemeter

TG-F2040-E03

4th edition Aug 2020 K

1st edition Jun 2014 K