ADG201A-EP

Rev. 0 | Page 4 of 8

ABSOLUTE MAXIMUM RATINGS

TA = 25°C, unless otherwise noted.

Table 3.

Parameter

Rating

VDD to VSS

44 V

VDD to GND

25 V

VSS to GND

−25 V

Analog Inputs1

VSS − 0.3 V to VDD + 0.3 V

Digital Inputs1

VSS − 2 V to VDD + 2 V or 20 mA

(whichever occurs first)

Pulsed Current, S or D

70 mA (pulsed at 1 ms,

10% duty cycle maximum)

Continuous Current, S or D

30 mA

Operating Temperature Range

−55°C to +125°C

Storage Temperature Range

−65°C to +150°C

Power Dissipation

Up to +75°C

470 mW

Derates above +75°C by

6 mW/°C

Lead Soldering

Reflow, Peak Temperature

260 (+0/−5)°C

Time at Peak Temperature

20 sec to 40 sec

1

Overvoltages at IN, S, or D are clamped by internal diodes. Current should be

limited to the maximum ratings given.

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

Only one absolute maximum rating may be applied at a time.

ESD CAUTION