 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
HD6432351 Datasheet(PDF) 658 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
HD6432351 Datasheet(HTML) 658 Page - Renesas Technology Corp |
|
|
658 / 1025 page  Section 14 Smart Card Interface Rev. 3.00 Sep 15, 2006 page 624 of 988 REJ09B0330-0300 SMR Setting The GM bit is cleared to 0 in normal smart card interface mode, and set to 1 in GSM mode. The O/ E bit is cleared to 0 if the IC card is of the direct convention type, and set to 1 if of the inverse convention type. Bits CKS1 and CKS0 select the clock source of the on-chip baud rate generator. See section 14.3.5, Clock. BRR Setting BRR is used to set the bit rate. See section 14.3.5, Clock, for the method of calculating the value to be set. SCR Setting The function of the TIE, RIE, TE, and RE bits is the same as for the normal SCI. For details, see section 13, Serial Communication Interface (SCI). Bits CKE1 and CKE0 specify the clock output. When the GM bit in SMR is cleared to 0, set these bits to B'00 if a clock is not to be output, or to B'01 if a clock is to be output. When the GM bit in SMR is set to 1, clock output is performed. The clock output can also be fixed high or low. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
