H8SX1663 datasheet(265/1158 Pages) RENESAS

265 / 1158 page

Section 6 Bus Controller (BSC)

Rev.1.00 Jun. 07, 2006 Page 213 of 1102

REJ09B0294-0100

6.8

Burst ROM Interface

In this LSI, external address space areas 0 and 1 can be designated as burst ROM space, and burst

ROM interfacing performed. The burst ROM interface enables ROM with page access capability

to be accessed at high speed.

Areas 1 and 0 can be designated as burst ROM space by means of bits BSRM1 and BSRM0 in

BROMCR. Consecutive burst accesses of up to 32 words can be performed, according to the

setting of bits BSWDn1 and BSWDn0 (n = 0, 1) in BROMCR. From one to eight cycles can be

selected for burst access.

Settings can be made independently for area 0 and area 1.

In the burst ROM interface, the burst access covers only CPU read accesses. Other accesses are

performed with the similar method to the basic bus interface.

6.8.1

Burst ROM Space Setting

Burst ROM interface can be specified for areas 0 and 1. Areas 0 and 1 can be specified as burst

ROM space by setting bits BSRMn (n = 0, 1) in BROMCR.

6.8.2

Data Bus

The bus width of the burst ROM space can be specified as 8-bit or 16-bit burst ROM interface

space according to the ABWHn and ABWLn bits (n = 0, 1) in ABWCR.

For the 8-bit bus width, data bus (D7 to D0) is valid. For the 16-bit bus width, data bus (D15 to

D0) is valid.

Access size and data alignment are the same as the basic bus interface. For details, see section

6.5.6, Endian and Data Alignment.

H8SX1663 Datasheet(PDF) 265 Page - Renesas Technology Corp