SL1118 datasheet(3/4 Pages) SECOS

3 / 4 page

01-Jun-2002 Rev. A

Page

3 of 4

h tp://www.SeCoSGmbH.com/

Any changing of specification will not be informed individual

Elektronische Bauelemente

SL1118

0.8A Low Dropout Positive

Adjustable or Fixed-Mode Regulator

Electrical Characteristics

Parameter

Conditions

Min

Typ

Max Unit

Reference Voltage

L1118ADJ

Io=10mA, TJ=25 : , (VIN-VOUT)=1.5V

1.225 1.250 1.275

L1118-1.5

Io=10mA, TJ=25 : , 3V VIN 12V

1.470 1.500 1.530

L1118-1.8

Io=10mA, TJ=25 : , 3.3V VIN 12V

1.764 1.800 1.836

L1118-2.5

Io=10mA, TJ=25 : , 4V VIN 12V

2.450 2.500 2.550

L1118-3.3

Io=10mA, TJ=25 : , 4.8V VIN 12V

3.235 3.300 3.365

Output Voltage

L1118-5.0

Io=10mA, TJ=25 : , 6.5V VIN 12V

4.900 5.000 5.100

Line Regulation

L1118-XXX

Io=10mA, VOUT+1.5V< VIN <12V, TJ=25 :

0.2

L1118ADJ

VIN=3.3V, Vadj=0, 0mA< Io <0.8A, TJ=25 :

(Note 1,2)

L1118-1.5

VIN=3V, 0mA< Io <0.8A, TJ=25 : (Note 1,2)

L1118-1.8

VIN=3.3V, 0mA< Io <0.8A, TJ=25 : (Note 1,2)

L1118-2.5

VIN=4V, 0mA< Io <0.8A, TJ=25 : (Note 1,2)

L1118-3.3

VIN=5V, 0mA< Io <0.8A, TJ=25 : (Note 1,2)

Load Regulation

L1118-5.0

VIN=8V, 0mA< Io <0.8A, TJ=25 : (Note 1,2)

Dropout Voltage

(VIN-VOUT)

L1118ADJ/1.5/

1.8/2.5/3.3/5.0

Io=0.8A,( VOUT =0.1% VOUT)

1.2

1.4

Current Limit

L1118ADJ/1.5/

1.8/2.5/3.3/5.0

VIN-VOUT=5V

0.9

Minimum Load Current SL1118-XXX

0 : TJ 125 :

Thermal Regulation

TA=25 ,30ms pulse

0.008 0.04 %/W

F=120HZ,COUT=25uF Tantalum, IOUT=0.8A

Ripple Rejection

L1118-XXX

VIN=VOUT+3V

Temperature Stability

IO=10mA

0.5

Thermal Resistance

Junction–to-Ambient(No

heat sink ;No air flow)

117

Thermal Resistance

Junction-to-Case

Control Circuitry/Power Transistor

Note 1: See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation

are measured at a constant junction temperature by low duty cycle pulse testing. Load regulation is measured at the

output lead =1/18” from the package.

Note 2: Line and load regulation are guaranteed up to the maximum power dissipation of 5W. Power dissipation is

determined by the difference between input and output and the output current. Guaranteed maximum power

dissipation will not be available over the full input/output range.

Note 3: Quiescent current is defined as the minimum output current required in maintaining regulation. At 12V input/output

differential the device is guaranteed to regulate if the output current is greater than 10mA.

SL1118 Datasheet(PDF) 3 Page - SeCoS Halbleitertechnologie GmbH

SL1118 Datasheet(HTML) 3 Page - SeCoS Halbleitertechnologie GmbH

Html Pages

1 2 3 4

Datasheet Download

Link URL