-61-

H HiTRON

DUAL SELECTABLE AC INPUT AC-DC 19" COMPATIBLE

DOUBLE EUROCARD MULTI-OUTPUT 360 WATTS

SWITCHING MODE POWER SUPPLIES HSU360 SERIES

FEATURES:

DUAL INPUT RANGE USER SELECTABLE

DOUBLE OR TRIPLE CONVERTER

ARCHITECTURE

19" COMPATIBLE EUROCARD FORMAT

MEET THE SAFETY STANDARDS

EMI MEET CISPR PUB. 22 & FCC CLASS A

CE MARKING COMPLIANCE

6U X 12HP X 160MM DOUBLE EUROCARD

VMEbus STANDARD

SPECIFICATION

INPUT SPECIFICATION

Input Voltage: 115Vac/230Vac dual selectable.

Input Connector: DIN 41612 for HSU360T.

IEC320 AC receptacle for HSU360.

Input Frequency: 47-63Hz

Inrush Current: Typ. 65A @230Vac.

Input Current: HSU360 6.5A@115Vac/3.5A@230Vac.

HSU360T 6.2A@115Vac/3.0A@230Vac.

Dielectric Withstand: Meet IEC 60950-1.

EMI: Meet CISPR PUB. 22 & FCC Class A.

Power Fail/OK: Option.

Remote (Logic) Inhibit: Available.

Hold-up Time: Typ. 20mS.

Earth leakage: Typ. 0.3mA @230Vac.

Over Temperature Protection (OTP): Option.

OUTPUT SPECIFICATION

Output Voltage: See Ratings Chart.

Output Current: See Ratings Chart.

Output Wattage: Typ. 360 Watts for HSU360/HSU360T.

Output Connector: DIN 41612 at rear.

Line Regulation: Typ. 0.4%.

Load Regulation: VO1 typ. ±1.0%(Main).

VO2 typ. ±1.0%(Main).

VO3 typ. ±1.0%(Main).

or typ. ±3.0%(PR) for HSU360T.

Noise & Ripple: Typ. 1% peak to peak.

OVP: Built-in at main VO1/VO2/VO3 (Latch).

Adjustability: Available at main output VO1,VO2,VO3.

Remote Sense: Installed at main VO1.

Overload Protection (OLP): Fully protected against

output overload and short circuit.

Consult factory for OLP setting.

GENERAL SPECIFICATION

Efficiency: Typ. 75-80.0%.

Switching Frequency: Typ. 100K Hz.

Circuit Topology: Forward circuit.

HSU360 triple converter.

HSU360T dual converter architecture.

Transient Response: Typ. 3mS following a 25% load change.

Power Density: 2.28 Watts / Cubic Inch for HSU360 & 360T.

Safety Standard: IEC 60950-1/UL 60950-1 Class I.

Operating Temperature: 0 to +50°C at full load. Derates

linearly to +70°C at half load.

Storage Temperature: -20 to +85°C.

Temperature Coefficient: Typ. 0.04%/°C.

Cooling: At least 60cfm forced air flow is required

for full load.

Construction format: 12HP(TE)x6Ux160mm

19” compatible double Eurocard VMEbus standard.

Note: Due to requests in market and advances in technology, specifications subject to change without notification.

In application