TMS77C82 datasheet(24/66 Pages) TI

24 / 66 page

TMS370Cx4x

8-BIT MICROCONTROLLER

SPNS016C – NOVEMBER 1992 – REVISED FEBRUARY 1997

POST OFFICE BOX 1443

• HOUSTON, TEXAS 77251–1443

timer 1 module (continued)

The TMS370Cx4x device includes a 24-bit WD timer, contained in the T1 module, which can be programmed

as an event counter, pulse accumulator, or interval timer if the WD function is not used. The WD function is to

monitor software and hardware operation and to implement a system reset when the WD counter is not properly

serviced (WD counter overflow or WD counter is re-initialized by an incorrect value). The WD can be configured

as one of three mask options as follows:

D Standard WD configuration (see Figure 8) for ’C742A EPROM and mask-ROM devices:

–

Watchdog mode

–

Ten different WD overflow rates ranging from 6.55 ms to 3.35 s at 5-MHz SYSCLK

–

A WD reset key (WDRST) register is used to clear the watchdog counter (WDCNTR) when a correct

value is written

–

Generates a system reset if an incorrect value is written to the WD reset key or if the counter

overflows

–

A WD overflow flag (WD OVRFL INT FLAG) bit that indicates whether the WD timer initiated a

system reset

–

Non-watchdog mode

–

Watchdog timer can be configured as an event counter, pulse accumulator, or an interval timer

16-Bit

Watchdog Counter

Reset

Prescaler

Clock

Watchdog Reset Key

WD OVRFL

TAP SEL

WD OVRFL

RST ENA

System Reset

T1CTL1.7

WDRST.7-0

WDCNTR.15-0

T1CTL2.7

T1CTL2.5

WD OVRFL

INT ENA

Interrupt

T1CTL2.6

WD OVRFL

INT FLAG

Figure 8. Standard Watchdog

TMS77C82 Datasheet(PDF) 24 Page - Texas Instruments

TMS77C82 Datasheet(HTML) 24 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

Datasheet Download

Link URL